Course Overview

    Overview

    Course Highlights

    Eligibility Criteria

    Benefits

    What Is Root Cause Analysis and Why It Matters at WorkUntitledA Practical Problem-Solving Discipline

    Root Cause Analysis (RCA) is a structured problem-solving discipline that identifies the fundamental cause of a problem, defect or failure rather than treating its symptoms, so the issue does not recur. This Root Cause Analysis Training in Czechia gives quality, operations and engineering professionals a complete, practical toolkit to investigate problems and put lasting corrective actions in place. Delivered as a focused one-day programme, the course moves from precise problem definition through the 5 Whys, Fishbone (Ishikawa) diagram, Fault Tree Analysis, FMEA and the 8D methodology, to corrective action planning and verification. Hands-on exercises let you apply each tool to realistic scenarios during the session. RCA underpins ISO 9001:2015 corrective action (Clause 10.2), the Analyse phase of Six Sigma DMAIC, and problem management in manufacturing, automotive, healthcare and IT. Whether you work in the Skoda Auto supply base or a Prague service centre, these are skills you can apply the very next day. Train your team with Invensis Learning and turn recurring problems into permanent fixes.

    What Is Root Cause Analysis and Why It Matters at WorkA Practical Problem-Solving Discipline

    Root Cause Analysis (RCA) is a structured problem-solving discipline that identifies the fundamental cause of a problem, defect or failure rather than treating its symptoms, so the issue does not recur. This Root Cause Analysis Training in Czechia gives quality, operations and engineering professionals a complete, practical toolkit to investigate problems and put lasting corrective actions in place.

    Delivered as a focused one-day programme, the course moves from precise problem definition through the 5 Whys, Fishbone (Ishikawa) diagram, Fault Tree Analysis, FMEA and the 8D methodology, to corrective action planning and verification. Hands-on exercises let you apply each tool to realistic scenarios during the session.

    RCA underpins ISO 9001:2015 corrective action (Clause 10.2), the Analyse phase of Six Sigma DMAIC, and problem management in manufacturing, automotive, healthcare and IT. Whether you work in the Skoda Auto supply base or a Prague service centre, these are skills you can apply the very next day. Train your team with Invensis Learning and turn recurring problems into permanent fixes.

    Certification Badge

    Key Highlightsof the Root Cause Analysis Training Course

    End-to-End Skill Development

    • Structured Root Cause Analysis training in the Czechia is designed to help learners understand core RCA concepts, methodologies, and analytical tools covered in the program
    • Course content aligned with current industry expectations, real-world process improvement requirements, and practical learning objectives for Czechia quality and operations professionals through our comprehensive Root Cause Analysis training program
    • Real-world examples and scenario-based learning to help learners connect RCA techniques with everyday manufacturing, service, and operations situations
    • Guided learning support to help participants strengthen understanding, improve confidence, and apply Root Cause Analysis skills effectively in their roles

    Structured Courseware and Learning Resources

    • Access to organized Root Cause Analysis course materials including 5 Whys worksheets, fishbone diagram templates, Pareto chart guides, and fault tree analysis frameworks designed to support step-by-step learning
    • Topic-wise learning resources, exercises, and knowledge checks to reinforce understanding of RCA tools, improvement methodologies, and corrective action integration
    • Practice activities, assignments, and scenario-based exercises to help learners apply RCA techniques in realistic quality and process improvement situations using resources from the Online Root Cause Analysis course
    • Supplementary learning aids such as 8D worksheets, change analysis checklists, barrier analysis templates, and Kepner-Tregoe reference cards

    Instructor-Led, Practical Learning Experience

    • Live interactive sessions delivered by experienced Root Cause Analysis practitioners with hands-on domain expertise across manufacturing, quality assurance, and operations sectors
    • Real-world examples, case discussions, and applied RCA exercises to improve practical understanding of cause and effect diagrams, Pareto analysis, and fault tree techniques
    • Opportunities to ask questions, clarify doubts, and participate in trainer-led discussions on root cause identification, prioritization, and corrective action planning
    • Learn through instructor-led Root Cause Analysis training focused on solving real operational and quality challenges

    Flexible Learning Support in Czechia

    • Instructor-led training formats available for individual learners and corporate teams across the Czechia
    • Options include live virtual classroom training, onsite training, and customized group training depending on availability and organizational requirements
    • Learning support designed to help participants stay on track before, during, and after the Root Cause Analysis training
    • Additional revision and post-training support may be available based on the selected course format

    Learn the Core Concepts Covered in the Course

    • Understand the key concepts and principles of Root Cause Analysis including its definition, applications, and why systematic RCA matters for quality and process improvement
    • Learn improvement methodologies including the 3Cs framework, 8Ds approach, PDCA cycle, DMAIC, Kaizen, and Kepner-Tregoe Analysis based on the course curriculum
    • Explore practical use cases showing how RCA techniques are applied in manufacturing, service, and operations environments across Czechia industries
    • Build role-relevant knowledge of cause and effect diagrams, Pareto analysis, fault tree analysis, scatter diagrams, and control charts that support better problem-solving decisions

    Practice, Assessment, and Completion Support

    • Practice root cause identification, fishbone diagram construction, Pareto chart analysis, and 5 Whys investigation through exercises and scenario-based activities
    • Use assessments to identify knowledge gaps in RCA skills and strengthen understanding of weaker problem-solving and analytical areas
    • Receive guidance from instructors to improve understanding of RCA methodologies and stay aligned with course objectives
    • Earn a course completion certificate after successfully meeting the training requirements

    Career and Workplace Application

    • Build practical Root Cause Analysis skills that can support career growth, role advancement, or improved process and quality delivery performance in the Czechia
    • Strengthen confidence in applying 5 Whys, fishbone diagrams, fault tree analysis, and Pareto prioritization to real-world quality and operational challenges
    • Improve professional credibility through structured, skill-focused Root Cause Analysis training recognized across Czechia manufacturing, quality, and operations industries
    • Support organizational capability building when delivered as corporate or team training across quality assurance, manufacturing, healthcare, and operations sectors

    Root Cause Analysis Training Eligibility in the CzechiaWho Can Enroll?

    • No formal prerequisites are required to enroll in the Root Cause Analysis training program

    • Basic problem-solving and analytical skills are beneficial but not mandatory for enrollment

    • Professionals with no prior experience in formal RCA methods are welcome to join the program

    • Learners from all industries including manufacturing, quality assurance, healthcare, operations, and services can benefit from this training

    • Individuals and corporate teams seeking to build practical RCA problem-solving skills are eligible to enroll

    What You Gain from RCA TrainingReal Capability, Not Just Theory

    For Individuals

    For Individuals

    Root Cause Analysis training helps professionals move from firefighting the same issues to solving them permanently. The one-day programme suits quality engineers, production supervisors, process improvement practitioners, health and safety leads and IT problem managers. Whether you investigate manufacturing defects, service failures or safety incidents, you leave able to select the right RCA tool for the problem in front of you.

    If recurring problems are draining your time, RCA gives you a repeatable method to find and fix their true cause. You gain a toolkit that is respected across manufacturing, automotive, healthcare and IT, and skills that transfer to any employer or sector in Czechia.

    • Investigate any problem methodically instead of jumping to the first fix
    • Master five proven RCA tools: the 5 Whys, Fishbone, Fault Tree Analysis, FMEA and 8D
    • Write precise problem statements that make root causes far easier to find
    • Facilitate 5 Whys and Fishbone workshops and lead a team through them
    • Complete a full 8D report, from containment to permanent corrective action
    • Develop corrective actions that hold and verify that they actually work
    • Support ISO 9001:2015 corrective action (Clause 10.2) with a documented approach
    • Apply the tools at work the very next day with confidence
    For Organizations

    For Organizations

    Root Cause Analysis group training helps organisations in Czechia stop the same problems returning. Teams learn a structured investigation method they can apply to defects, incidents and process failures the moment they return to work. Delivered onsite or live online, the programme can be tailored to your sector, whether automotive manufacturing, engineering, pharmaceuticals or IT services.

    For organisations under pressure to cut cost of poor quality and satisfy customer and regulatory corrective-action requirements, RCA training creates a consistent, evidence-based approach. Your people learn to contain, investigate and permanently resolve problems as a disciplined team.

    • Cuts recurring defects, rework and customer complaints across your operation
    • Builds one shared problem-solving language for quality and operations teams
    • Strengthens ISO 9001:2015 corrective action and CAPA compliance
    • Equips teams to respond to customer 8D requests with confidence
    • Reduces cost of poor quality by fixing root causes, not symptoms
    • Delivered onsite so teams practise on your own real problems
    • Standardises RCA practice across plants, shifts and business units
    • Builds in-house capability instead of relying on outside investigators

    RCA Career Paths Across CzechiaRoles That Value Problem-Solvers

    Root cause analysis is one of the most transferable skills in Czech industry, valued anywhere problems must be investigated and stopped. The country's export-led automotive, electronics and engineering base runs on structured corrective action, so professionals with RCA training who can facilitate a 5 Whys, build a Fishbone or complete an 8D are sought after by quality and operations teams. Demand spans quality engineers, continuous improvement specialists and production leaders, and here is what the Czech market shows right now.

    Kc1.19M

    Average quality manager salary, Czechia

    per year, WorldSalaries 2026

    Kc810K

    Quality engineer average pay

    per year, ERI 2026

    Kc1.16M

    Production manager average pay

    per year, ERI SalaryExpert 2026

    63%

    Quality manager pay vs national average

    above average, WorldSalaries 2026

    Sectors Hiring

    • —Automotive Manufacturing and Tier 1 and 2 Suppliers
    • —Electronics and Precision Engineering
    • —Machinery and Industrial Equipment
    • —Pharmaceuticals and Medical Devices
    • —Aerospace and Aviation Components
    • —IT Services and Shared Service Centres

    Market Trends

    • —Automotive quality escapes drive constant 8D and RCA demand
    • —ISO 9001 and IATF 16949 push structured corrective action
    • —Shift to EV and e-mobility raising process-quality expectations
    • —Nearshoring growing the Czech manufacturing supplier base
    • —Cost-of-poor-quality pressure across export-led factories
    • —Scarcity of trained problem-solvers on the shop floor

    Sources: ERI SalaryExpert, WorldSalaries, Glassdoor, platy.cz (Czech Republic) 2026; Czech automotive industry data.

    What Is Driving Demand for RCA Skills in Czechia

    Automotive Quality Escapes

    Czech carmakers and their Tier 1 and 2 suppliers must answer field defects and customer complaints with formal 8D reports, the exact structured RCA discipline this training builds.

    RCA builds 8D and corrective-action skills

    Recurring Defects and Rework

    Export-led factories lose margin to defects that keep returning because teams fix symptoms. RCA equips them to find and eliminate the underlying cause permanently.

    RCA finds the true cause, not the symptom

    ISO 9001 and IATF 16949 Pressure

    ISO 9001:2015 Clause 10.2 and IATF 16949 require organisations to determine root causes and prevent recurrence, so auditors increasingly expect evidence of structured RCA.

    RCA supports documented corrective action

    Shortage of Skilled Problem-Solvers

    Czech manufacturers have deep operational talent but few people trained to facilitate a Fishbone or Fault Tree Analysis, leaving a real gap in structured investigation skills.

    RCA makes your team stand out

    EV and Precision-Quality Shift

    As Czech plants move into EV components and precision electronics, tighter tolerances make fast, accurate root cause investigation essential to protecting quality and output.

    RCA raises process-quality capability

    Cost of Poor Quality

    Scrap, warranty claims and downtime quietly erode profitability. RCA gives teams a repeatable way to attack the biggest recurring losses and reduce cost of poor quality.

    RCA cuts waste at the source

    Sources: Czech automotive industry associations, ISO 9001:2015 and IATF 16949 requirements; Czech manufacturing market data 2026.

    RCA is a skill every quality and operations team needs. Give your people a proven method to investigate problems and stop them recurring. Book your Czechia session today.

    Your Czechia Problem-Solving Transformation

    From Firefighting to Root Cause Fixing

    The Shift RCA Training Delivers

    Czech industry is export-led and quality-critical, and employers increasingly separate people who can permanently solve problems from those who only contain them. Here is the shift this training delivers.

    Today

    Problems keep coming back because teams fix the symptom under time pressure

    After RCA

    A repeatable method to find and remove the true root cause so issues stay fixed

    Today

    Investigations rely on opinion and the loudest voice in the room

    After RCA

    Evidence-based analysis using the 5 Whys, Fishbone, FTA, FMEA and 8D

    Today

    Customer 8D requests and audit findings are stressful and slow

    After RCA

    Confidence to run a structured 8D and satisfy customers and ISO 9001 auditors

    You master RCA

    Before

    Seen as a capable operator, but not the person who solves the hard problems

    Now you have

    Recognition as the team's go-to structured problem-solver

    Before

    Limited to a single tool like the 5 Whys for every situation

    Now you have

    A full toolkit and the judgement to pick the right tool for each problem

    Before

    Corrective actions that fade and problems that quietly return

    Now you have

    Corrective actions you verify actually work and that prevent recurrence

    Before

    Skills tied to one process or employer

    Now you have

    A discipline valued across automotive, engineering, pharma and IT in Czechia

    "The difference between a team that keeps firefighting and one that improves is a structured way to find the root cause, and the best employers know it."

    Join 50,000+ professionals who trained with Invensis Learning and changed how they solve problems.

    Sources: ERI SalaryExpert, WorldSalaries, platy.cz (Czech Republic) 2026.

    Module 1: Key Concepts and Principles

    • RCA definition, core applications, and why systematic root cause analysis matters for quality and process improvement
    • Overview of common RCA tools and their application contexts in manufacturing, service, and operations environments
    • Understanding how effective RCA differentiates symptom treatment from permanent problem resolution

    Module 2: Improvement Methodologies

    • 3Cs framework and 8Ds approach for structured problem description, containment, root cause identification, and corrective action
    • PDCA cycle, DMAIC methodology, Kaizen philosophy, and their role in supporting systematic continuous improvement
    • Kepner-Tregoe Analysis for structured problem-solving and decision-making in complex operational situations

    Module 3: Root Cause Analysis Using 5 Whys

    • Benefits and preparation steps for conducting effective 5 Whys investigations in team and individual settings
    • The 5 Whys process funnel from problem statement through iterative questioning to root cause identification
    • Practical examples of 5 Whys application across manufacturing and service contexts, including known limitations and pitfall avoidance

    Module 4: Root Cause Analysis Techniques

    • Cause and effect diagrams, Pareto analysis, change analysis, and barrier analysis for systematic root cause identification
    • Scatter diagrams, fault tree analysis, and their application in identifying relationships and failure pathways
    • Control charts and run charts for monitoring process variation and distinguishing common from special cause variation

    Module 5: Cause and Effect Diagram Methodology

    • Construction techniques for fishbone diagrams in both manufacturing and service application contexts
    • 5M1E checklists covering Man, Machine, Material, Method, Measurement, and Environment as structured cause categories
    • Integrating cause and effect diagram outputs with corrective action planning and improvement initiatives

    Module 6: Root Cause Prioritization

    • Pareto chart construction methodology and data collection strategies for identifying the most significant root causes
    • Practical application of Pareto analysis for prioritizing corrective actions and focusing improvement resources effectively
    • Linking prioritization outputs to corrective action tracking and sustainable process improvement planning

    Course Curriculumof the Root Cause Analysis Training

    The online Root Cause Analysis training course curriculum in the Czechia is structured across six modules, taking learners from foundational RCA concepts and principles through to practical tool application, cause and effect methodology, and root cause prioritization.

    • RCA definition, core applications, and why systematic root cause analysis matters for quality and process improvement
    • Overview of common RCA tools and their application contexts in manufacturing, service, and operations environments
    • Understanding how effective RCA differentiates symptom treatment from permanent problem resolution

    Sharpens your ability to tell whether you've actually solved a problem or just patched over the symptom.

    image

    100% Secure and Safe download

    The Problem-Solving Tools You Will MasterA Complete RCA Toolkit

    In this Root Cause Analysis training you will learn to define problems precisely and apply the five core RCA tools: the 5 Whys, the Fishbone diagram, Fault Tree Analysis, FMEA and the 8D method. By the end of the one-day programme you can investigate a problem and put a verified corrective action in place.

    Precise Problem Definition

    Write a clear, factual problem statement and use Is / Is Not analysis to set the boundary of the problem before you investigate, so your analysis stays focused on what actually happened.

    The 5 Whys Technique

    Drill from a visible symptom to the true root cause with structured questioning, and recognise when a 5 Whys chain has stopped too early at blame rather than a system cause.

    Fishbone (Ishikawa) Analysis

    Facilitate a team Fishbone workshop across the 6M cause categories to map every possible cause of a complex, multi-factor problem and identify the most likely ones.

    Fault Tree Analysis

    Use top-down Fault Tree Analysis with AND and OR logic gates to model how safety-critical or complex failures can occur, ideal for high-severity incident investigation.

    FMEA in Root Cause Analysis

    Apply Failure Mode and Effects Analysis to prioritise causes and corrective actions by risk, using severity, occurrence and detection to focus effort where it matters most.

    The 8D Problem-Solving Method

    Work through all eight disciplines, from containment and root cause to permanent corrective action and prevention, and complete an 8D report for a realistic scenario.

    Corrective Action and Verification

    Develop corrective actions that address the verified root cause, then confirm they are effective, distinguishing verification from validation so problems do not return.

    Linking RCA to ISO 9001 and CAPA

    Connect your investigations to ISO 9001:2015 corrective action (Clause 10.2) and to CAPA in regulated industries, so your findings stand up to customers and auditors.

    Who Should TakeRoot Cause Analysis Training in Czechia?

    Operations Managers

    Process Engineers

    Quality Control Analysts

    Manufacturing Engineers

    Production Supervisors

    Continuous Improvement Managers

    Lean Six Sigma Practitioners

    Quality Assurance Managers

    Who Can Take This Certification Training

    Root Cause Analysis Training Modesfor Professionals and Teams

    We offer flexible training formats designed to suit different learning preferences, schedules, and professional goals. Whether you prefer self-paced learning or a structured, corporate, instructor-led experience, choose the option that best supports your skill development journey through the best Root Cause Analysis online training options available.

    Root Cause Analysis Live Virtual Training

    • Live online instructor-led sessions

    • Interactive discussions and virtual activities

    • Expert guidance from experienced trainers

    • Practice assessments and revision support

    • Dedicated Q&A sessions for concept clarification

    • Fixed schedules for accountability and momentum

    • Small batch sizes for personalized attention

    • Access from any location with internet connectivity

    CZK 8370

    Attend fully interactive online sessions from anywhere while benefiting from real-time instructor guidance and collaborative learning experiences through weekday Root Cause Analysis training.

    Untitled

    Best For: Professionals seeking the flexibility of online learning without compromising on live instructor interaction.

    Untitled

    Root Cause Analysis Classroom Training

    • Instructor-led classroom sessions

    • Interactive discussions and group activities

    • Real-world examples and practical exercises

    • Structured learning with fixed schedules

    • Opportunities for peer networking and collaboration

    • Practice assessments and knowledge checks

    • Dedicated Q&A and concept clarification

    • Immediate trainer feedback and support

    Untitled

    Learn through face-to-face sessions led by experienced instructors in a collaborative classroom environment. This classroom Root Cause Analysis training combines expert guidance, peer interaction, and hands-on activities to create an engaging learning experience.

    Untitled

    Best For: Learners who prefer in-person interaction, structured schedules, and collaborative learning experiences.

    Untitled

    Root Cause Analysis Corporate Group Training

    • Customized training aligned to organizational goals

    • Flexible delivery: onsite, virtual, hybrid, or blended

    • Scheduling tailored to business availability

    • Role-based examples and industry-relevant discussions

    • Progress tracking and learner assessments where applicable

    • Dedicated coordination and administrative support

    • Consistent learning experiences across teams

    • Scalable delivery for local, regional, or global workforces

    Untitled

    Designed for organizations that want to build capabilities at scale, standardize problem-solving practices, and support workforce development through customized Root Cause Analysis training for companies.

    Untitled

    Best For: Organizations looking to upskill employees, address capability gaps, and deliver consistent training across teams.

    Untitled

    Root Cause Analysis Focused 1-to-1 Training

    • One-to-one instructor attention

    • Customized learning plans and objectives

    • Flexible scheduling based on availability

    • Personalized feedback and coaching

    • Additional focus on challenging topics

    • Targeted practice and revision support

    • Faster clarification of questions and concepts

    • Learning pace is adapted to individual needs

    Untitled

    Receive personalized instruction tailored to your goals, pace, and learning requirements through dedicated sessions delivered by the trusted Root Cause Analysis training company.

    Untitled

    Best For: Professionals seeking personalized guidance, accelerated learning, or focused support to achieve specific outcomes.

    Untitled

    Root Cause Analysis Live Virtual Training

    Root Cause Analysis Live Virtual Training

    Live online instructor-led sessions

    Interactive discussions and virtual activities

    Expert guidance from experienced trainers

    Practice assessments and revision support

    Dedicated Q&A sessions for concept clarification

    Fixed schedules for accountability and momentum

    Small batch sizes for personalized attention

    Access from any location with internet connectivity

    Starts from

    CZK 8370

    Please Note:Attend fully interactive online sessions from anywhere while benefiting from real-time instructor guidance and collaborative learning experiences through weekday Root Cause Analysis training.

    Best For: Professionals seeking the flexibility of online learning without compromising on live instructor interaction.

    Loading schedules…

    Why Choose Invensis Learning for Root Cause Analysis Training in CzechiaPractical Training That Sticks

    As an established RCA training company in Czechia, Invensis Learning delivers practical, instructor-led Root Cause Analysis training for individuals and teams that want to solve problems permanently, not just contain them. As an ISO 9001:2015 and ISO 27001:2022 certified provider, we combine experienced trainers, hands-on exercises and structured courseware to make sure the tools stick. Whether you enrol as an individual or arrange training for your team in Czechia, you get flexible delivery, real-world case practice and learner support before, during and after the session, so you leave able to apply RCA with confidence from day one.

    • ISO 9001:2015 certified training provider with a strong quality-management pedigree
    • Experienced trainers who have run real RCA investigations in industry
    • Practical, hands-on sessions where you apply every tool to real scenarios
    • Flexible delivery: live online, classroom and onsite across Czechia
    • Tailored corporate training that uses your own real problems as case studies
    • Course completion certificate and post-training support for every learner
    • Trusted by professionals and organisations across manufacturing, IT and services
    • Globally consistent training delivered in 100+ countries

    4

    Flexible Learning Modes

    98%

    First-Attempt Pass Rate

    5000+

    Accredited Trainers Globally

    4.7/5

    Rated by Learners Worldwide

    ISO 9001:2015 Certified

    ISO 9001:2015 Certified

    ISO 27001:2022 Certified

    ISO 27001:2022 Certified

    Secure SSL Encryption

    Secure SSL Encryption

    Leaders in Training industry for 12+ years

    Leaders in Training industry for 12+ years

    Over 5000 five star reviews

    Over 5000 five star reviews

    Level AA conformance, W3C WCAG 2.2

    Level AA conformance, W3C WCAG 2.2

    Root Cause Analysis Training Locations in CzechiaAll our classroom training is now available online at your convenience

    Root Cause Analysis in Czechia

    Hilton Prague Atrium, 311, Pobřežní, Florenc, Karlín, Prague 8, district Prague 8, Prague, 186 00, Czech Republic

    Root Cause Analysis in Czechia

    Grand Hotel Prague Towers, 1655/1, Kongresová, Nusle, Prague 4, district Prague 4, Prague, 140 00, Czech Republic

    corporate banner

    RCA Training for Czech TeamsBuilt Around Your Real Problems

    Untitled

    • Delivered onsite or live online for teams across Czechia
    • Tailored to your sector, from automotive to pharma and IT
    • Teams practise on your own live defects and incidents
    • Builds one shared problem-solving language across shifts and sites
    • Strengthens ISO 9001:2015 and IATF 16949 corrective action
    • Flexible scheduling that fits production and shift patterns
    • Experienced trainers with real industry RCA experience

    Trusted by Leading Organisations

    Skoda AutoBoschContinentalZFSiemensHoneywell

    What Our Learners Say

    Untitled

    The 8D Module Changed How We Handle Defects

    "The training gave me a clear method for every kind of problem. The 8D and Fishbone sessions were hands-on, and I used the exact approach on a real customer complaint the week I got back."

    Jakub Novak

    Quality Engineer, Automotive Supplier

    Untitled

    0/0

    Finally Stopped Fixing the Same Issues

    "I used to rely on the 5 Whys for everything. Now I know when to reach for Fault Tree Analysis or FMEA instead. Our recurring line stoppages have dropped noticeably."

    Tereza Dvorakova

    Continuous Improvement Specialist

    Untitled

    0/0

    Practical and Easy to Apply

    "Very practical trainer with real shop-floor examples. Writing a proper problem statement before jumping in was the single most useful thing I took away."

    Petr Svoboda

    Production Supervisor

    Untitled

    0/0

    RCA Works Beyond Manufacturing

    "I manage major IT incidents and the same tools apply. The structured approach to root cause and prevention has made our problem management reviews much sharper."

    Lucie Kucerova

    IT Problem Manager

    Untitled

    0/0

    Consistent RCA Across Our Plant

    "We trained two shifts together and now everyone investigates problems the same way. Our corrective actions hold up far better in customer and ISO 9001 audits."

    Martina Horakova

    Quality Manager, Automotive Tier 1 Supplier

    Untitled

    0/0

    Real Capability, Delivered Onsite

    "Invensis tailored the session to our own defects. The team came away able to run structured investigations without us bringing in outside consultants every time."

    Tomas Prochazka

    Operations Director, Electronics Manufacturing

    Untitled

    0/0



    Trustpilot

    4.6

    Ratings

    100K+

    Happy Learners

    100+

    Locations Worldwide

    99%

    Training Satisfaction

    Enquire with us now

    Drop us a query and our learning consultant will reach out to you shortly

    Get Course Details & Pricing

    Fill out this form and we will respond quickly.

    We also deliver Root Cause Analysis Trainingacross multiple cities

    Invensis Learning delivers industry-leading Root Cause Analysis training solutions tailored for individuals and organizations.

    Prague
    City map with location markers

    Explore Our Other Course Categories

    Agile

    Project Management

    ITSM

    Quality Management

    DevOps

    IT Governance

    Other Related Courses

    Foundation

    Poka Yoke

    Foundation

    Lean Six Sigma Yellow Belt

    Foundation

    Business Process Management

    Foundation

    Six Sigma Awareness

    Foundation

    7 QC Tools Training

    Advanced

    Lean Six Sigma Black Belt

    Foundation

    Quality Function Deployment

    Foundation

    Lean IT

    Advanced

    Lean Six Sigma Green Belt

    Foundation

    Minitab Essentials

    Foundation

    Design for Six Sigma

    Foundation

    Lean Fundamentals

    Foundation

    Quality by Design

    Foundation

    Lean Manufacturing

    Foundation

    Value Stream Mapping

    Foundation

    Kaizen

    Foundation

    Root Cause Analysis

    Frequently Asked QuestionsHere's everything you may ask...

    Root Cause Analysis is a structured problem-solving discipline that finds the fundamental cause of a problem, defect or failure rather than treating the symptom, so it does not happen again. This one-day training teaches a toolkit of RCA methods, including the 5 Whys, Fishbone, Fault Tree Analysis, FMEA and 8D.

    General

    What is Root Cause Analysis (RCA)?

    Root Cause Analysis is a structured problem-solving discipline that finds the fundamental cause of a problem, defect or failure rather than treating the symptom, so it does not happen again. This one-day training teaches a toolkit of RCA methods, including the 5 Whys, Fishbone, Fault Tree Analysis, FMEA and 8D.

    Who should attend this RCA training in Czechia?

    The course suits quality engineers and managers, production supervisors, continuous improvement and Six Sigma practitioners, health and safety leads, IT problem managers, and anyone who investigates problems and implements corrective actions. No prior quality training is required.

    Is RCA training worth it?

    Yes. RCA skills are among the most transferable in Czech industry, valued across automotive, engineering, pharmaceuticals and IT. You gain a repeatable method to stop recurring problems, reduce cost of poor quality and strengthen corrective action, capability that employers actively seek.

    Do I need any prior experience or prerequisites?

    No. The training has no prerequisites and introduces RCA from first principles. Some familiarity with quality or process improvement helps but is not required, so the course works for both newcomers and experienced professionals.

    How long is the RCA training and how is it delivered?

    The programme runs for one day (about 8 hours) and is available as live online (virtual instructor-led), classroom and onsite corporate training. Hands-on exercises run throughout so you apply each tool during the session.

    Pricing

    How much does RCA training cost in Czechia?

    Course fees vary by delivery mode, group size and whether you train as an individual or a team, so pricing is available on request. Contact us for a tailored quote for public or onsite training. Request a quote to see current options.

    What is included in the course fee?

    The fee typically includes instructor-led training across all six RCA modules, courseware and reference materials, hands-on exercises and case studies, and a course completion certificate from Invensis Learning, along with post-training support.

    Do you offer group or corporate discounts?

    Yes. We offer group and corporate pricing for teams, with tailored onsite or live online delivery. This is often the best value when training a whole quality or operations team together. Ask about corporate or group pricing for your team.

    What payment options are available?

    We accept major credit and debit cards and bank transfers, and can invoice organisations for corporate bookings. Speak with a learning advisor to arrange the option that suits you.

    Is the price shown per person or per group?

    Public course pricing is per person, while corporate and onsite training is quoted per group based on team size and delivery format. Contact us for a quote matched to your needs.

    Assessment

    How is learning assessed on this course?

    There is no formal assessment. Learning is reinforced through hands-on RCA exercises, case study investigations and team discussion throughout the day, so you practise every tool on realistic problems as you go.

    Do I receive a certificate?

    Yes. You receive a course completion certificate from Invensis Learning after finishing the one-day programme. This is a practical skills course, so it builds and evidences capability rather than a formal credential.

    Will I be able to apply RCA at work straight away?

    Yes. The course is designed for immediate application. By the end you can define a problem, run a 5 Whys or Fishbone workshop, complete an 8D report, and develop and verify corrective actions on your own real problems.

    Does this training align with ISO 9001?

    Yes. RCA directly supports ISO 9001:2015 corrective action (Clause 10.2), which requires organisations to determine the causes of nonconformities and act to prevent recurrence. The course also links RCA to CAPA in regulated industries.

    Is any prior certification needed to benefit from this course?

    No. RCA training stands on its own and complements quality programmes such as Six Sigma, Lean, 7 QC Tools and Kaizen. It is open to anyone who investigates and resolves problems, whatever their background.

    Course Content

    What RCA tools does the course cover?

    The course covers five core RCA tools: the 5 Whys for simple problems, the Fishbone (Ishikawa) diagram for complex multi-cause problems, Fault Tree Analysis for safety-critical events, FMEA for risk prioritisation, and the 8D method for team-based corrective action.

    What will I learn about the 8D method?

    You work through all eight disciplines, from forming the team and containing the problem to identifying the root cause of occurrence and escape, implementing permanent corrective action, preventing recurrence, and closing out. You also complete an 8D report for a realistic scenario.

    Does the course include hands-on practice?

    Yes. Every module includes exercises: an Is / Is Not problem-definition activity, a 5 Whys investigation, a Fishbone workshop and a full 8D report. You apply the tools to realistic problems throughout the day.

    What is the difference between the 5 Whys and a Fishbone diagram?

    The 5 Whys is a quick, iterative questioning method best for simple, single-cause problems. The Fishbone diagram is a structured brainstorm across cause categories, better for complex problems with several interacting causes. The course teaches when to use each.

    Are course materials provided?

    Yes. You receive structured courseware, reference guides and templates for tools such as the Fishbone diagram, 5 Whys and 8D report, so you can apply the methods at work after the training.

    Enrollment

    How do I enrol in the RCA training?

    You can enrol through the Invensis Learning website. Choose your preferred format and date, complete booking, and you will receive joining details, schedules and course materials. Talk to a learning advisor if you need help choosing a session.

    What delivery formats are available in Czechia?

    The course is offered as live online (virtual instructor-led), classroom and onsite corporate training. Teams across Czechia can be trained onsite at your premises or live online, whichever suits your schedule.

    How soon can I start?

    Public sessions run regularly in live online format, and onsite corporate sessions are scheduled to fit your team's availability. Contact us to see upcoming dates and book the next convenient session.

    Can you train my whole team onsite?

    Yes. We deliver onsite and live online group training tailored to your sector and your own real problems. This is ideal for quality and operations teams that want a consistent approach. Ask about corporate or group training for your team.

    What is your reschedule or cancellation policy?

    Rescheduling and cancellations are handled per our published policy, and selected options allow you to transfer to another session. Reach out to our team for the details that apply to your booking.