Course Overview

    Overview

    Course Highlights

    Eligibility Criteria

    Benefits

    Exam Format

    Certification Cost

    What Is the Lean Six Sigma Green Belt Certification?UntitledYour Route to Data-Driven Improvement

    The Lean Six Sigma Green Belt (LSSGB) is an intermediate process improvement credential that validates your ability to run data-driven DMAIC projects that reduce defects, cycle time and cost. Lean Six Sigma Green Belt certification training in Czechia gives you the statistical tools, Lean techniques and structured method that employers across automotive, manufacturing and shared services value most. The credential is awarded by the International Association for Six Sigma Certification (IASSC), an independent body now part of PeopleCert, and is recognised worldwide. The exam covers all five DMAIC phases, Define, Measure, Analyze, Improve and Control, at a practitioner level, with no formal prerequisites to sit it. Whether you work in a Skoda or Bosch supply chain, a Prague or Brno business services centre, or a pharmaceutical plant, the Green Belt designation proves you can turn process problems into measurable savings. Start your journey with Invensis Learning and move from study to certified with a clear, supported path.

    Invensis Learning is an accredited IASSC (Peoplecert) training partner in Czechia (2778), approved to deliver official LSSGB training using IASSC-aligned courseware.

    What Is the Lean Six Sigma Green Belt Certification?Your Route to Data-Driven Improvement

    The Lean Six Sigma Green Belt (LSSGB) is an intermediate process improvement credential that validates your ability to run data-driven DMAIC projects that reduce defects, cycle time and cost. Lean Six Sigma Green Belt certification training in Czechia gives you the statistical tools, Lean techniques and structured method that employers across automotive, manufacturing and shared services value most.

    The credential is awarded by the International Association for Six Sigma Certification (IASSC), an independent body now part of PeopleCert, and is recognised worldwide. The exam covers all five DMAIC phases, Define, Measure, Analyze, Improve and Control, at a practitioner level, with no formal prerequisites to sit it.

    Whether you work in a Skoda or Bosch supply chain, a Prague or Brno business services centre, or a pharmaceutical plant, the Green Belt designation proves you can turn process problems into measurable savings. Start your journey with Invensis Learning and move from study to certified with a clear, supported path.

    Certification Badge

    Invensis Learning is an accredited IASSC (Peoplecert) training partner in Czechia (2778), approved to deliver official LSSGB training using IASSC-aligned courseware.

    Key HighlightsIASSC-Accredited Lean Six Sigma Green Belt Program

    End-to-End Learning and Certification Readiness

    • Structured LSSGB Certification training in Czechia designed to help learners understand core concepts, frameworks, tools, and practices
    • Course content aligned with the latest syllabus, certification requirements, or industry learning objectives where applicable
    • Practical examples and scenario-based exercises to help learners connect training concepts with workplace situations
    • Guided preparation support for learners pursuing certification, assessment, or professional skill validation

    Structured Courseware and Learning Resources

    • Access to organized course materials that support step-by-step learning
    • Topic-wise learning resources, exercises, and knowledge checks to reinforce understanding
    • Practice questions, assignments, quizzes, or mock assessments included where applicable
    • Supplementary learning aids such as templates, case studies, guides, flashcards, or toolkits depending on the course structure

    Instructor-Led, Practical Learning Experience

    • Live interactive sessions delivered through instructor-led LSSGB training in Czechia by experienced trainers with relevant process improvement expertise
    • Real-world examples, case discussions, and practical activities to improve applied understanding
    • Opportunities to ask questions, clarify doubts, and participate in trainer-led discussions
    • Training focused on helping learners apply concepts at work, not just complete the course content

    Flexible Learning Support in Czechia

    • Flexible learning options available for professionals seeking LSSGB training online
    • Options include live virtual classroom training, onsite training, self-paced learning, or customized group training depending on course availability
    • Learning support designed to help participants stay on track throughout the training journey
    • Additional revision, retake, or post-training support may be available based on the selected course

    Learn the Core Concepts Covered in the Course

    • Understand foundational principles, terminology, and important subject areas related to LSSGB
    • Learn relevant tools, methods, frameworks, processes, or practices based on the course curriculum
    • Explore practical use cases that show how the concepts are applied in professional environments
    • Build role-relevant knowledge that supports better decision-making, execution, and workplace performance

    Assessment, Practice, and Completion Support

    • Practice through quizzes, assignments, exercises, mock tests, or simulations where applicable
    • Use assessments to identify learning gaps and strengthen weak areas
    • Receive guidance on certification preparation as part of the LSSGB certification program in Czechia
    • Earn an LSSGB certificate after successfully meeting the course requirements

    Career and Workplace Application

    • Build practical skills that support professional growth, role advancement, and improved job performance in Czechia
    • Strengthen confidence in applying course concepts to workplace challenges
    • Improve professional credibility through structured training and certification preparation where applicable
    • Support organizational capability building through a corporate LSSGB training program designed for team-based learning initiatives

    LSSGB Certification Eligibility in CzechiaDo You Qualify for the LSSGB Exam?

    LSSGB has no formal prerequisites. It is open to professionals at all levels who want to lead process-improvement projects:

    • Open to all professionals no formal prerequisites required by IASSC.

    • Suitable for process improvement leads, business analysts, project managers, operations managers, quality professionals, and team leads.

    • Familiarity with basic statistics is helpful but not required (the course covers all needed statistics).

    • Practical exposure to a workplace process you can improve is recommended for applying the techniques.

    What You Gain from Green Belt CertificationSkills, Recognition and Career Growth

    For Individuals

    For Individuals

    Green Belt training helps you become the person on the team who can prove improvement with data, not instinct. You gain a structured DMAIC method, core statistical skills and Lean tools that apply directly to quality, production and service processes. Whether you are advancing from a Yellow Belt, moving from a support role into project leadership, or working in automotive, electronics, pharma or shared services, this training builds capability aligned with what Czech employers expect.

    If you want a globally recognised credential that lifts your earning potential and opens senior improvement roles, the Green Belt is a clear next step. You gain practical skills, exam readiness, and a supported route from study to certified.

    • Validates your ability to lead DMAIC improvement projects with data
    • Boosts earning potential across quality, process and operations roles
    • Opens roles in automotive, manufacturing, GBS and pharma sectors in Czechia
    • Builds practical command of statistics, hypothesis testing and SPC
    • Earns a globally recognised credential that travels across employers and borders
    • Equips you with Lean tools such as 5S, value stream mapping and Kanban to cut waste
    • Provides a strong foundation for progressing to Lean Six Sigma Black Belt
    • Builds the confidence to deliver measurable savings from day one
    For Organizations

    For Organizations

    Green Belt group training helps organisations build a consistent improvement culture by equipping teams with a shared method and practical tools. The training can be delivered for production lines, quality functions or service centres. For organisations under margin pressure from the EV transition, automation and rising costs, this training provides a scalable, flexible way to embed data-driven improvement.

    If your teams spot problems but struggle to quantify and fix them, group training creates a common DMAIC approach. Staff gain a standardised way to reduce waste, sustain gains and connect daily work to measurable results.

    • Builds a shared DMAIC language across quality, production and operations teams
    • Reduces defects, rework and cycle time to protect margins
    • Standardises process improvement across plants and service centres
    • Develops in-house improvement capability without external consultants
    • Offers flexible delivery for shop-floor, quality and operations staff
    • Ties customised projects to your real business problems
    • Supports Industry 4.0 and operational excellence goals
    • Scales training for teams across Czechia and the wider region

    LSSGB Exam Format in CzechiaWhat to expect on exam day

    The Lean Six Sigma Green Belt exam validates your ability to lead process-improvement projects using the DMAIC methodology and core Lean Six Sigma tools. The exam focuses on the Define, Measure, Analyse, Improve, and Control phases; process mapping and value stream analysis; basic statistical analysis (descriptive statistics, hypothesis testing, control charts); and root-cause analysis techniques. Through a combination of multiple-choice questions, candidates are tested on their ability to apply Lean Six Sigma principles in real-world process-improvement environments.

    Exam ComponentDetails
    Exam NameIASSC Certified Lean Six Sigma Green Belt (ICGB)
    Conducted ByInternational Association for Six Sigma Certification (IASSC)
    Number of Questions100 multiple-choice and true/false questions
    Exam Duration180 minutes (3 Hours)
    Passing Score70%
    TypeClosed Book
    Testing BasisIASSC Lean Six Sigma Green Belt Body of Knowledge
    Testing FormatIASSC web-based proctored exam (online or at a test centre)

    LSSGB Certification Cost in Czechia

    The total cost of earning the Lean Six Sigma yellow Belt credential typically includes the fee for LSSGB training and exam preparation, along with the certification examination cost.

    Training Cost Includes:

    • 4 days of expert-led IASSC-accredited Lean Six Sigma Green Belt training
    • Official IASSC-aligned digital courseware and DMAIC reference materials
    • Exam prep support including 100-question mock exams and applied statistical exercises
    • Exam-focused guidance designed to improve first-attempt readiness on the IASSC ICGB paper
    • The Lean Six Sigma Green Belt training cost in Czechia is CZK 31690

    Exam Cost:

    • IASSC Certified Lean Six Sigma Green Belt (ICGB) exam fee paid to IASSC
    • Online proctored or test centre delivery via the IASSC web exam portal
    • 100 multiple-choice and true/false questions, 3 hours, 70% pass mark
    • Lifetime-valid IASSC ICGB credential no renewal required
    • Most Invensis Learning packages bundle the IASSC ICGB exam voucher

    Note: Prices may vary depending on your location and delivery preferences. Reach out to our learning advisors for the exact pricing details.

    Roles, Demand and Pay in CzechiaWhy Consider Green Belt Certification?

    Lean Six Sigma Green Belt skills are in steady demand across Czechia's automotive plants, electronics manufacturers, pharmaceutical sites and the fast-growing Prague and Brno business services hubs. As employers face margin pressure, the EV transition and Industry 4.0 automation, professionals who can run DMAIC projects and remove waste are valued from quality engineer through to operations and operational excellence manager. Here is what the local market is telling us right now.

    CZK 982,000

    Process Improvement Manager salary, Czechia

    average per year, SalaryExpert 2026

    CZK 792,000

    Quality Engineer salary, Czechia

    average per year, ERI 2026

    CZK 946,000

    Operations Manager salary, Czechia

    average per year, ERI 2026

    38+

    Six Sigma roles listed, Czechia

    Glassdoor 2026

    SECTORS HIRING

    • —Automotive Manufacturing and Tier-1 Suppliers
    • —Electronics and Industrial Engineering
    • —Shared Services and Global Business Services (GBS)
    • —Pharmaceuticals and Medical Devices
    • —Logistics, Supply Chain and Distribution
    • —Banking, Insurance and Financial Services

    GROWTH TRENDS

    • —Automotive EV and SAE Level 3 transition driving process redesign
    • —Prague and Brno GBS hubs scaling process transformation
    • —Industry 4.0 and automation raising demand for data-driven improvement
    • —Margin pressure pushing operational excellence across manufacturing
    • —Skilled-talent shortage lifting the value of certified improvement professionals
    • —Pharma and electronics quality compliance fuelling DMAIC adoption

    Sources: SalaryExpert, ERI, Platy.cz, Glassdoor (Czech Republic) 2026; CzechInvest, AutoSAP, PwC Czech Republic.

    Why Czech Employers Need Data-Driven Improvement Now

    Automotive Margin and EV Pressure

    Czech car makers and tier-1 suppliers face thin margins and a costly shift to EV and SAE Level 3 vehicles. Green Belts who cut defects and cycle time help protect profitability.

    Green Belt builds defect and cycle-time reduction skills

    Process Transformation in GBS Hubs

    Prague and Brno shared services centres are re-engineering finance, HR and procurement processes. Certified improvement talent is needed to standardise and automate them.

    Green Belt builds process mapping and standardisation skills

    Industry 4.0 and Automation

    Smart factories generate huge volumes of process data. Employers need professionals who can apply statistics and SPC to turn that data into measurable gains.

    Green Belt builds statistics and SPC skills

    Skilled Improvement Talent Shortage

    Czechia has deep manufacturing experience but few certified Lean Six Sigma practitioners. The Green Belt credential makes holders stand out in a tight labour market.

    Green Belt makes certified practitioners stand out

    Quality and Compliance Pressure

    Pharma, medical device and electronics makers face strict quality standards. DMAIC discipline helps reduce errors and sustain audit-ready, capable processes.

    Green Belt builds DMAIC and capability skills

    Rising Cost and Waste Pressure

    Energy and input costs push manufacturers to eliminate waste. Lean tools such as 5S, VSM and Kanban let Green Belts remove non-value work across operations.

    Green Belt builds Lean waste-reduction skills

    Sources: CzechInvest, AutoSAP, PwC Czech Republic, Mordor Intelligence; Glassdoor (Czech Republic) 2026.

    Lean Six Sigma Green Belt is more than a credential. It is the practical skill set Czech employers need to cut waste and defects. Join professionals turning process problems into savings. Start your journey today.

    Your Czechia Career Transformation

    Your Career Before and After the Green Belt

    The Transformation This Credential Delivers

    Czechia's manufacturing and business services economy is modernising fast through the EV transition, automation and process transformation, and employers increasingly separate certified improvement professionals from the rest. Here is which side of that line you want to be on.

    Today

    Salary capped with little leverage to negotiate in the Czech market

    After Green Belt

    Process and quality manager roles in Czechia average around CZK 930,000 to 982,000

    Today

    Overlooked for roles that list Lean Six Sigma as preferred

    After Green Belt

    Eligible for improvement roles across automotive, GBS, pharma and electronics

    Today

    Confident on the floor, but employers want data-driven proof

    After Green Belt

    Fluent in DMAIC and Lean tools that turn problems into measurable savings

    You earn your Green Belt

    Before

    Improvement work depends on instinct, not a proven, repeatable method

    Now you have

    A recognised credential that proves you can run DMAIC improvement projects

    Before

    Limited to supporting roles on quality and process teams

    Now you have

    A clear route into process improvement and operations leadership roles

    Before

    You can spot problems but lack the tools to quantify and prove them

    Now you have

    Command of statistics, hypothesis testing and SPC to back your decisions

    Before

    Recognition fades when you change employer or sector

    Now you have

    A globally portable credential valued across Czech and EU employers

    "In Czech industry, the gap between doing the work and proving you can improve it is now a recognised credential, and the employers that matter already know it."

    Join 50,000+ professionals who trained with Invensis Learning and made the shift.

    Sources: SalaryExpert, ERI, Platy.cz, Glassdoor (Czech Republic) 2026.

    How to Get LSSGB Certified in CzechiaStep-by-Step Certification Process

    The path to online LSSGB certification follows a straightforward single-exam route. Complete accredited training, prepare using mock examinations and practical exercises, take the IASSC ICGB examination, and earn a lifetime-valid Lean Six Sigma yellow Belt credential.

    Step 1: Enrol in the 4-Day LSSGB Training

    Choose your preferred Invensis Learning LSSGB cohort (4-Day Live Online Bootcamp, E-Learning, or Corporate Group Training). The course covers the full DMAIC methodology at Green Belt depth.

    Step 2: Create Your IASSC Account

    Create your account on the IASSC web exam portal. Invensis Learning packages typically include the IASSC ICGB exam voucher.

    Step 3: Complete the Course and Practice Mocks

    Attend the full 4-day training, work through the statistical exercises, and complete at least one full-length 100-question mock exam.

    Step 4: Schedule the IASSC Green Belt Exam

    Book your exam: 100 multiple-choice and true/false questions, 3 hours, 70% pass mark. Online proctored or at an IASSC-approved test centre.

    Step 5: Take the IASSC LSSGB Exam

    Sit the exam. You receive your result via the IASSC portal.

    Step 6: Activate Your Credential

    IASSC issues your Lean Six Sigma Green Belt certificate and digital badge. Lifetime valid , no renewal required.

    Step 1

    Enrol in the 4-Day LSSGB Training

    Choose your preferred Invensis Learning LSSGB cohort (4-Day Live Online Bootcamp, E-Learning, or Corporate Group Training). The course covers the full DMAIC methodology at Green Belt depth.

    Step 2

    Create Your IASSC Account

    Create your account on the IASSC web exam portal. Invensis Learning packages typically include the IASSC ICGB exam voucher.

    Step 3

    Complete the Course and Practice Mocks

    Attend the full 4-day training, work through the statistical exercises, and complete at least one full-length 100-question mock exam.

    Step 4

    Schedule the IASSC Green Belt Exam

    Book your exam: 100 multiple-choice and true/false questions, 3 hours, 70% pass mark. Online proctored or at an IASSC-approved test centre.

    Step 5

    Take the IASSC LSSGB Exam

    Sit the exam. You receive your result via the IASSC portal.

    Step 6

    Activate Your Credential

    IASSC issues your Lean Six Sigma Green Belt certificate and digital badge. Lifetime valid , no renewal required.

    Module 1: Define Phase

    • Voice of the Customer (VoC) and Critical to Quality (CTQ)
    • Project charter, SIPOC, and stakeholder analysis
    • Business case and benefits realisation
    • Defining problem statements and project scope

    Module 2: Measure Phase

    • Process mapping, value stream mapping, and 5S
    • Operational definitions and data collection planning
    • Measurement System Analysis (MSA) and Gauge R&R
    • Process capability and sigma level

    Module 3: Analyze Phase

    • Cause-and-effect (Ishikawa) analysis and 5 Whys
    • Hypothesis testing fundamentals
    • Regression and correlation
    • ANOVA and multi-variate analysis at Green Belt depth

    Module 4: Improve Phase

    • Solution generation techniques (brainstorming, SCAMPER, TRIZ basics)
    • Solution selection: pros/cons matrices and prioritisation
    • Pilot design and validation
    • Implementation planning

    Module 5: Control Phase

    • Control plans and standardisation
    • Control charts (variable and attribute)
    • Sustainment, audits, and continual improvement
    • Project closeout and handover

    Module 6: IASSC LSSGB Exam Preparation

    • IASSC Examination Content Outline walkthrough
    • Question patterns and open-book exam strategy
    • Time management for the 3-hour, 100-question paper
    • Full-length mock exam with debrief

    Course Curriculumof the Lean Six Sigma Green Belt Certification Training

    The LSSGB curriculum follows the official IASSC Lean Six Sigma Green Belt BOK and covers all tested domains across the syllabus.

    • Voice of the Customer (VoC) and Critical to Quality (CTQ)
    • Project charter, SIPOC, and stakeholder analysis
    • Business case and benefits realisation
    • Defining problem statements and project scope

    VoC to CTQ translation questions are a common early hurdle for candidates moving up from Yellow Belt.

    image

    100% Secure and Safe download

    Skills You Will Build in This ProgrammeDMAIC Tools You Can Apply at Work

    This Lean Six Sigma Green Belt programme builds practical, job-ready capability across all five DMAIC phases. By the end you can lead and support improvement projects that reduce defects, waste and cost using data, not guesswork.

    Define and Scope Improvement Projects

    Build a business case, project charter and SIPOC, capture the voice of the customer, and translate process problems into clear, measurable goals using the Y = f(x) approach.

    Measure Process Performance with Data

    Map processes, run measurement system analysis, and calculate core metrics such as DPMO, yield and process capability to establish a reliable performance baseline.

    Analyse Root Causes Statistically

    Apply graphical analysis, inferential statistics and hypothesis testing, including t-tests, ANOVA and chi-squared, to confirm the true drivers of variation and defects.

    Improve Processes with Proven Methods

    Use simple and multiple regression and designed experiments to test solutions, optimise settings, and deliver improvements that hold up under real conditions.

    Control and Sustain the Gains

    Apply SPC control charts, 5S, Kanban and Poka-Yoke, and build control and response plans so improvements are sustained long after the project closes.

    Lead Lean Waste Reduction

    Apply Lean principles, value stream mapping and the seven wastes to streamline flow, cut cycle time and remove non-value-adding work across operations.

    Who Should TakeLean Six Sigma Green Belt Certification Training in Czechia?

    Process Improvement Lead

    Business Analyst

    Operations Manager

    Quality Analyst

    Project Manager (Improvement Projects)

    Process Engineer

    Continuous Improvement Specialist

    Manufacturing / Operations Supervisor

    Who Can Take This Certification Training

    Lean Six Sigma Green Belt Training Modesfor Professionals and Teams

    We offer flexible training formats designed to suit different learning preferences, schedules, and professional goals. Whether you prefer collaborative classroom learning, live online sessions, team-based training, or personalized guidance, choose the option that best supports your Lean Six Sigma learning and professional development journey.

    Lean Six Sigma Green Belt Live Virtual Training

    • Live online instructor-led sessions

    • Interactive discussions and virtual activities

    • Expert guidance from experienced trainers

    • Practice assessments and revision support

    • Dedicated Q&A sessions for concept clarification

    • Fixed schedules for accountability and momentum

    • Small batch sizes for personalized attention

    • Access from any location with internet connectivity

    CZK 31690

    Attend fully interactive online sessions from anywhere while benefiting from real-time instructor guidance and collaborative learning experiences. This virtual LSSGB training option enables professionals to participate from any location.

    Official IASSC-aligned Course Material

    Best For: Professionals seeking the flexibility of online learning without compromising on live instructor interaction.

    Untitled

    Lean Six Sigma Green Belt Classroom Training

    • Instructor-led classroom sessions

    • Interactive discussions and group activities

    • Real-world examples and practical exercises

    • Structured learning with fixed schedules

    • Opportunities for peer networking and collaboration

    • Practice assessments and knowledge checks

    • Dedicated Q&A and concept clarification

    • Immediate trainer feedback and support

    Untitled

    Learn through face-to-face sessions led by experienced instructors in a collaborative classroom environment. This classroom LSSGB training in Czechia format combines expert guidance, peer interaction, and hands-on activities to create an engaging learning experience.

    Official IASSC-aligned Course Material

    Best For: Learners who prefer in-person interaction, structured schedules, and collaborative learning experiences.

    Untitled

    Lean Six Sigma Green Belt Corporate Group Training

    • Customized training aligned to organizational goals

    • Flexible delivery: onsite, virtual, hybrid, or blended

    • Scheduling tailored to business availability

    • Role-based examples and industry-relevant discussions

    • Progress tracking and learner assessments where applicable

    • Dedicated coordination and administrative support

    • Consistent learning experiences across teams

    • Scalable delivery for local, regional, or global workforces

    Untitled

    Designed for organizations that want to improve process performance, standardize quality practices, and build continuous improvement capabilities across teams. This format is ideal for LSSGB training for companies in Czechia seeking to strengthen operational excellence and problem-solving skills.

    Official IASSC-aligned Course Material

    Best For: Organizations looking to upskill employees, address capability gaps, and deliver consistent learning experiences across teams.

    Untitled

    Lean Six Sigma Green Belt Focused 1-to-1 Training

    • One-to-one instructor attention

    • Customized learning plans and objectives

    • Flexible scheduling based on availability

    • Personalized feedback and coaching

    • Additional focus on challenging topics

    • Targeted practice and revision support

    • Faster clarification of questions and concepts

    • Learning pace adapted to individual needs

    Untitled

    Receive personalized instruction tailored to your goals, pace, and learning requirements through dedicated sessions with an expert trainer. This format provides LSSGB coaching for professionals seeking individualized support and focused guidance on Lean Six Sigma concepts and applications.

    Official IASSC-aligned Course Material

    Best For: Professionals seeking personalized guidance, accelerated learning, or focused support to achieve specific outcomes.

    Untitled

    Lean Six Sigma Green Belt Live Virtual Training

    Lean Six Sigma Green Belt Live Virtual Training

    Live online instructor-led sessions

    Interactive discussions and virtual activities

    Expert guidance from experienced trainers

    Practice assessments and revision support

    Dedicated Q&A sessions for concept clarification

    Fixed schedules for accountability and momentum

    Small batch sizes for personalized attention

    Access from any location with internet connectivity

    Starts from

    CZK 31690

    Please Note:Attend fully interactive online sessions from anywhere while benefiting from real-time instructor guidance and collaborative learning experiences. This virtual LSSGB training option enables professionals to participate from any location.

    Official IASSC-aligned Course Material

    Best For: Professionals seeking the flexibility of online learning without compromising on live instructor interaction.

    Loading schedules…

    Why Train with Invensis LearningFor Lean Six Sigma Green Belt Certification Training in Czechia

    As a leading LSSGB training company in Czechia, Invensis Learning delivers structured Lean Six Sigma Green Belt training for individual professionals and organisations that want to build genuine, data-driven improvement capability. Our programmes combine accredited trainers, IASSC-aligned courseware, hands-on project practice and learner-focused support. Whether you enrol as an individual or plan corporate training for your team, we provide a professional learning experience built around practical understanding, real-world application and exam readiness, backed by ISO 9001:2015 and ISO 27001:2022 certified operations.

    • Experienced, accredited trainers with real Lean Six Sigma project expertise
    • Live online and in-company delivery to suit your schedule in Czechia
    • IASSC-aligned courseware covering all five DMAIC phases
    • Practice questions and mock exams mapped to the Green Belt exam format
    • Hands-on projects that apply the tools to real workplace problems
    • Dedicated learner support before, during and after training
    • ISO 9001:2015 and ISO 27001:2022 certified training operations
    • Flexible group and corporate training across Czech industries

    60+

    Certification Courses

    50,000+

    Professionals Trained

    100+

    Countries Served

    ISO 9001:2015 Certified

    ISO 9001:2015 Certified

    ISO 27001:2022 Certified

    ISO 27001:2022 Certified

    Secure SSL Encryption

    Secure SSL Encryption

    Leaders in Training industry for 12+ years

    Leaders in Training industry for 12+ years

    Over 5000 five star reviews

    Over 5000 five star reviews

    Level AA conformance, W3C WCAG 2.2

    Level AA conformance, W3C WCAG 2.2

    Lean Six Sigma Green Belt Training Locations in CzechiaAll our classroom training is now available online at your convenience

    Lean Six Sigma Green Belt in Czechia

    Hilton Prague Atrium, 311, Pobřežní, Florenc, Karlín, Prague 8, district Prague 8, Prague, 186 00, Czech Republic

    Lean Six Sigma Green Belt in Czechia

    Grand Hotel Prague Towers, 1655/1, Kongresová, Nusle, Prague 4, district Prague 4, Prague, 140 00, Czech Republic

    corporate banner

    Corporate Lean Six Sigma TrainingFor Teams in Czechia

    Untitled

    • Upskill whole quality, process and operations teams together
    • Customised DMAIC projects tied to your real business problems
    • Onsite, live virtual or hybrid delivery across Czech sites
    • Accredited trainers with manufacturing and services experience
    • Flexible schedules aligned to shift and production patterns
    • Progress tracking and reporting for L&D leads and managers
    • Scalable delivery for teams across Czechia and the region

    Leading Organisations

    Skoda AutoBoschContinentalSiemensHoneywellABB

    What Our Learners Say

    Untitled

    A Method I Could Use Straight Away

    "The DMAIC structure finally gave me a method I could apply on the line. I used the Measure and Analyse tools on a real scrap problem during the course and cut defects within weeks."

    Jan Novak

    Process Engineer

    Untitled

    0/0

    Passed on My First Attempt

    "The statistics felt intimidating at first, but the trainer broke hypothesis testing and SPC down clearly. I passed the Green Belt exam on my first attempt and now use the tools daily."

    Petra Svobodova

    Quality Engineer

    Untitled

    0/0

    Practical and Hands-On

    "Strong, practical sessions on value stream mapping and 5S. I now lead small improvement projects in our plant with real confidence and a clear approach."

    Tomas Dvorak

    Continuous Improvement Specialist

    Untitled

    0/0

    Directly Relevant to My Work

    "Working in a Prague business services centre, the process mapping and control tools were directly relevant to my role. The mock exams made the real exam feel familiar."

    Marketa Prochazkova

    Operations Analyst, Shared Services

    Untitled

    0/0

    Real Impact on Our Shop Floor

    "We trained a cohort of our quality and production staff. The shared DMAIC language alone improved how teams solve problems, and we have seen measurable reductions in rework."

    Lukas Horak

    Operations Manager, Automotive Supplier

    Untitled

    0/0

    Tailored to Our Industry

    "Invensis Learning tailored the Green Belt projects to our compliance environment. Delivery was flexible around our shifts, and the trainers were genuinely experienced practitioners."

    Veronika Kucerova

    L&D Lead, Pharmaceuticals

    Untitled

    0/0



    Trustpilot

    4.6

    Ratings

    100K+

    Happy Learners

    100+

    Locations Worldwide

    99%

    Training Satisfaction

    Enquire with us now

    Drop us a query and our learning consultant will reach out to you shortly

    Get Course Details & Pricing

    Fill out this form and we will respond quickly.

    We also deliver Lean Six Sigma Green Belt Certification Trainingacross multiple cities

    Invensis Learning delivers industry-leading Lean Six Sigma Green Belt training solutions tailored for individuals and organizations.

    Prague
    City map with location markers

    Explore Our Other Course Categories

    Agile

    Project Management

    ITSM

    Quality Management

    DevOps

    IT Governance

    Other Related Courses

    Foundation

    Poka Yoke

    Foundation

    Lean Six Sigma Yellow Belt

    Foundation

    Business Process Management

    Foundation

    Six Sigma Awareness

    Foundation

    7 QC Tools Training

    Advanced

    Lean Six Sigma Black Belt

    Foundation

    Quality Function Deployment

    Foundation

    Lean IT

    Advanced

    Lean Six Sigma Green Belt

    Foundation

    Minitab Essentials

    Foundation

    Design for Six Sigma

    Foundation

    Lean Fundamentals

    Foundation

    Quality by Design

    Foundation

    Lean Manufacturing

    Foundation

    Value Stream Mapping

    Foundation

    Kaizen

    Foundation

    Root Cause Analysis

    Frequently Asked QuestionsHere's everything you may ask...

    The Lean Six Sigma Green Belt is an intermediate process improvement credential that proves you can lead and support DMAIC projects using data. It covers Lean and Six Sigma tools across the Define, Measure, Analyze, Improve and Control phases, and is recognised by employers worldwide.

    General

    What is the Lean Six Sigma Green Belt certification?

    The Lean Six Sigma Green Belt is an intermediate process improvement credential that proves you can lead and support DMAIC projects using data. It covers Lean and Six Sigma tools across the Define, Measure, Analyze, Improve and Control phases, and is recognised by employers worldwide.

    Is the Lean Six Sigma Green Belt worth it in Czechia?

    Yes. Czech employers in automotive, electronics, pharmaceuticals and the Prague and Brno business services hubs actively seek professionals who can cut waste and defects. Green Belt skills map to quality, process and operations roles that pay well above the national average.

    Who should take the Green Belt course?

    It suits quality engineers, process and manufacturing professionals, operations analysts, and anyone leading or supporting improvement projects. It also fits those advancing from Yellow Belt or planning to progress towards Black Belt.

    Do I need any prerequisites to get certified?

    No. The certification has no formal education, experience or training prerequisites, so you can sit the exam whenever you are ready. Training and real-world project experience are recommended but not required.

    Which body awards the Green Belt credential?

    The credential is awarded by the International Association for Six Sigma Certification (IASSC), an independent third-party body now part of PeopleCert. It provides a vendor-neutral validation of your Lean Six Sigma knowledge.

    How long is the certification valid?

    The Green Belt certification holds Current status for three years from the date you certify. You can renew it by passing the recertification exam before it elapses, keeping your credential active for another three years.

    Pricing

    How much does Green Belt training cost in Czechia?

    Training fees vary by format and provider, and corporate group rates differ from individual enrolment. Instructor-led Green Belt training is quoted on request. Request a quote for current pricing and upcoming batches in Czechia.

    What is included in the course fee?

    Your fee typically includes instructor-led sessions, courseware aligned to all five DMAIC phases, practice questions, mock exams, project guidance and learner support. The exam voucher is usually purchased separately.

    Is the exam fee included in the training price?

    No. The Green Belt exam voucher is bought separately and billed in USD under regional pricing, so it is not part of the training fee. We can guide you through purchasing and scheduling it.

    Do you offer group or corporate discounts?

    Yes. We offer corporate group training with customised schedules and volume-based pricing for quality, production and operations teams. Contact us for a tailored quote for your organisation.

    What payment options are available?

    We accept major cards and bank transfers, with instalment options on selected plans. Speak with a learning advisor to choose the option that suits you.

    Exam

    What is the format of the Green Belt exam?

    The exam is closed book with 100 multiple-choice and true or false questions. Some forms include up to 10 additional unscored questions. It is taken via online proctoring or at a Pearson VUE test centre.

    How long is the exam and what is the pass mark?

    You have three hours to complete the exam. To pass you must score at least 385 out of 550 points, which is roughly 70 percent, with questions drawn from across the five DMAIC phases.

    How many questions cover each DMAIC phase?

    The exam includes approximately 20 questions per phase, spread evenly across Define, Measure, Analyze, Improve and Control. This means broad mastery matters more than focusing on a single area.

    What if I do not pass the first time?

    You can retake the exam by purchasing another voucher. Our training, mock exams and practice questions are designed to prepare you thoroughly, so you can sit with confidence and reduce the chance of a resit.

    Where can I take the exam in Czechia?

    You can take it online with remote proctoring from home or work, available around the clock, or at a Pearson VUE test centre. Both options are available across Czechia.

    Course Content

    What topics does the Green Belt course cover?

    The course covers all five DMAIC phases: Define, Measure, Analyze, Improve and Control. You learn Lean tools such as 5S, value stream mapping and Kanban, plus statistics, hypothesis testing, regression and statistical process control.

    Can a beginner take this course?

    Yes. The course assumes no prior Lean Six Sigma knowledge and builds the statistics step by step. Hands-on examples and practice make the tools accessible even if you are new to data analysis.

    How many training hours does the course include?

    The programme includes 32 hours of training, delivered as intensive full days or spread across several shorter sessions. The schedule is designed to fit working professionals.

    Is there a hands-on project component?

    Yes. You apply the DMAIC tools to a real or simulated improvement project, so you leave able to run a project at work, not just pass an exam.

    What learning materials are provided?

    You receive courseware aligned to the Green Belt body of knowledge, practice questions, mock exams, templates and quizzes to reinforce each phase and prepare for the exam.

    Enrollment

    How soon can I start and how do I enrol?

    You can enrol online through Invensis Learning and join the next available batch. Choose your format, complete payment, and you receive access to schedules, courseware and resources. See upcoming batches to get started.

    What training formats are available?

    We offer online (live virtual) instructor-led training, classroom sessions and customised corporate group training, so you can choose the format that fits your schedule and location in Czechia.

    Is the training available across Czechia?

    Yes. Live online training is available anywhere in Czechia, and in-company sessions can be delivered onsite for teams in Prague, Brno, Plzen, Ostrava and beyond.

    Can I reschedule my enrolment to another batch?

    Yes. Flexible options let you reschedule or transfer to another batch, and selected plans let you attend the training twice. Contact support to arrange this.

    What is the refund or cancellation policy?

    Refunds and cancellations follow our published policy, and selected plans include a money-back option. Reach out to our team for the details that apply to your enrolment.