Course Overview

    Overview

    Course Highlights

    Eligibility Criteria

    Benefits

    What Is Design for Six Sigma, and Why It MattersUntitledDesigning Quality in, Not Inspecting It Out

    Design for Six Sigma Training in Czechia teaches you to design new products, services and processes that meet customer requirements and reach Six Sigma quality levels from the very first design decision. Built on Design for Six Sigma (DFSS), the course follows the DMADV roadmap, Define, Measure, Analyse, Design and Verify, and the tools that make it work: Voice of the Customer, CTQ flow-down, Quality Function Deployment, Pugh concept selection, Design FMEA and robust design. Unlike DMAIC, which improves processes that already exist, DFSS designs quality in from the start, so defects are prevented rather than fixed after launch. That matters in Czechia, where automotive, electronics and precision engineering employers compete on first-time-right design. This one-day programme suits design and systems engineers, R&D professionals, new product development managers, quality engineers and Six Sigma practitioners who want to add the design side of Six Sigma to their toolkit. No prior DFSS knowledge is assumed. Build the skills to design it right first time with Invensis Learning.

    What Is Design for Six Sigma, and Why It MattersDesigning Quality in, Not Inspecting It Out

    Design for Six Sigma Training in Czechia teaches you to design new products, services and processes that meet customer requirements and reach Six Sigma quality levels from the very first design decision. Built on Design for Six Sigma (DFSS), the course follows the DMADV roadmap, Define, Measure, Analyse, Design and Verify, and the tools that make it work: Voice of the Customer, CTQ flow-down, Quality Function Deployment, Pugh concept selection, Design FMEA and robust design.

    Unlike DMAIC, which improves processes that already exist, DFSS designs quality in from the start, so defects are prevented rather than fixed after launch. That matters in Czechia, where automotive, electronics and precision engineering employers compete on first-time-right design.

    This one-day programme suits design and systems engineers, R&D professionals, new product development managers, quality engineers and Six Sigma practitioners who want to add the design side of Six Sigma to their toolkit. No prior DFSS knowledge is assumed. Build the skills to design it right first time with Invensis Learning.

    Certification Badge

    Key Highlightsof the Design for Six Sigma Training Course

    End-to-End Skill Development

    • Structured Design for Six Sigma training in the Czechia designed to help learners understand the core DFSS phases, tools, and design quality workflows covered in the program
    • Course content aligned with current industry expectations, real-world product and process development requirements, and practical learning objectives for Czechia professionals
    • Real-world examples and scenario-based learning to help learners connect DFSS tools with everyday design engineering and quality management situations through online Design for Six Sigma training
    • Guided learning support to help participants strengthen understanding, improve confidence, and apply DFSS skills effectively in their roles

    Structured Courseware and Learning Resources

    • Access to organized DFSS course materials including Kano model analysis worksheets, QFD house of quality templates, and Pugh concept selection matrices designed to support step-by-step learning
    • Topic-wise learning resources, exercises, and knowledge checks to reinforce understanding of DFSS phases from project definition through verification
    • Practice activities, assignments, and scenario-based exercises to help learners apply DFSS tools in realistic design and development situations as part of a practical Design for Six Sigma bootcamp
    • Supplementary learning aids such as Taguchi DOE reference guides, DFMEA worksheets, noise management strategy templates, and parameter optimization guides

    Instructor-Led, Practical Learning Experience

    • Live interactive sessions delivered by experienced DFSS practitioners with hands-on domain expertise across manufacturing, engineering, R&D, and product development sectors
    • Real-world examples, case discussions, and applied design optimization exercises to improve practical understanding of DFSS methodologies
    • Opportunities to ask questions, clarify doubts, and participate in trainer-led discussions on customer needs, concept selection, and robust design
    • Training approach focused on helping learners use DFSS tools confidently at work through Design for Six Sigma coaching

    Flexible Learning Support in Czechia

    • Instructor-led training formats available for individual learners and corporate teams across the Czechia
    • Options include live virtual classroom training, onsite training, and customized group training depending on availability and organizational requirements
    • Learning support designed to help participants stay on track before, during, and after the Design for Six Sigma training
    • Additional revision and post-training support may be available based on the selected course format

    Learn the Core Concepts Covered in the Course

    • Understand DFSS overview, opportunity identification, project selection criteria, DFSS best practices, and project close procedures
    • Learn customer needs definition techniques including the Kano model, customer loss function, and QFD house of quality based on the course curriculum
    • Explore practical use cases showing how DFSS is applied in product design, process improvement, and service development environments
    • Build role-relevant knowledge of design optimization, Taguchi DOE, tolerance design, DFMEA, and noise management that supports better design decisions

    Practice, Assessment, and Completion Support

    • Practice Kano model analysis, QFD development, Pugh matrix scoring, Taguchi DOE application, and DFMEA creation through exercises and scenario-based activities
    • Use assessments to identify knowledge gaps in DFSS skills and strengthen understanding of weaker design quality areas
    • Receive guidance from instructors to improve understanding of DFSS phases and stay aligned with course objectives
    • Earn a course completion certificate after successfully meeting the training requirements

    Career and Workplace Application

    • Build practical DFSS skills that can support career growth, role advancement, or improved design quality performance in the Czechia
    • Strengthen confidence in applying the Kano model, QFD house of quality, Pugh matrix, Taguchi DOE, and DFMEA to real-world design and engineering challenges
    • Improve professional credibility through structured, skill-focused Design for Six Sigma training recognized across Czechia industries
    • Support organizational capability building when delivered as Design for Six Sigma corporate training for employees across engineering, manufacturing, R&D, and quality management sectors

    Design for Six Sigma Training Eligibility in the CzechiaWho Can Enroll?

    • No formal prerequisites are required to enroll in the Design for Six Sigma training program

    • Foundational knowledge of Six Sigma concepts is advantageous but not mandatory for participation

    • Professionals with no prior DFSS experience are welcome to join and will benefit from the structured curriculum

    • Learners from engineering, manufacturing, R&D, quality management, and product development backgrounds can benefit from this training

    • Individuals and corporate teams seeking to apply DFSS methodologies to design quality challenges are eligible to enroll

    What You Gain from DFSS SkillsReal Capability You Apply on Monday

    For Individuals

    For Individuals

    Design for Six Sigma training gives engineers and product teams a structured way to design quality into new products, services and processes. You learn to capture what customers really need, translate it into measurable design targets, and verify performance before launch. Whether you design components for the automotive supply chain, develop electronics, or bring medical devices to market in Czechia, DFSS helps you prevent defects instead of fixing them late.

    If you already use DMAIC to improve existing processes, DFSS completes the picture by helping you design new ones right first time. The tools, VOC, QFD, Pugh, DFMEA and robust design, apply straight to your next design project.

    • Design quality into products and processes from the first decision, not after defects appear
    • Apply the DMADV roadmap to real new product and process design projects
    • Turn customer needs into measurable CTQs with VOC and QFD
    • Cut costly late redesign by finding design risks early with DFMEA
    • Make designs robust to manufacturing, environmental and usage variation
    • Add the design counterpart to your existing DMAIC and Lean Six Sigma skills
    • Stand out to Czech automotive, electronics and medtech employers
    • Verify and validate designs against every CTQ with a design scorecard
    For Organizations

    For Organizations

    Design for Six Sigma group training helps organisations build first-time-right design capability across product development, engineering and quality teams. Delivered onsite or live online, it gives your people a shared DMADV language and toolset. For manufacturers under pressure to launch faster with fewer defects, DFSS reduces warranty cost, rework and late redesign.

    If your teams design new products or processes, DFSS training standardises how they capture customer needs, manage design risk and verify quality. The result is fewer surprises at launch and a lower cost of poor quality across your Czech operations.

    • Build first-time-right design capability across product, engineering and quality teams
    • Give teams a shared DMADV language and design toolset
    • Reduce warranty cost, rework and late redesign at launch
    • Strengthen readiness for IATF 16949 and ISO 13485 design demands
    • Standardise how teams capture customer needs and manage design risk
    • Deliver onsite or live online to fit team schedules in Czechia
    • Connect new product development to measurable quality outcomes
    • Grow in-house design-for-quality expertise across sites

    Where DFSS Careers Grow in CzechiaRoles, Demand and Sectors Hiring

    Design for Six Sigma skills are in demand across Czechia's manufacturing economy, where automotive, electronics, aerospace and medical device employers compete on first-time-right design. As carmakers retool for electric vehicles and suppliers face tighter quality demands, engineers who can design quality in, not inspect it out, stand out. Roles that value DFSS run from Quality and Design Engineer through R&D Engineer to Continuous Improvement Manager, and here is what the market is telling us right now.

    Kč 1.06M

    R&D Engineer average pay, Czechia

    per year, ERI SalaryExpert 2026

    Kč 1.01M

    Product Design Engineer average pay

    per year, ERI SalaryExpert 2026

    200,000+

    Unfilled engineering and factory roles

    Czech labour market 2026

    +29

    Automotive hiring outlook, Czechia

    Net Employment Outlook, ManpowerGroup 2026

    SECTORS HIRING

    • —Automotive and EV Manufacturing
    • —Automotive Supply Chain (Tier 1 and Tier 2)
    • —Electronics and Semiconductors
    • —Aerospace and Precision Engineering
    • —Medical Devices and Life Sciences
    • —Machinery and Industrial Equipment

    DEMAND DRIVERS

    • —EV transition forcing new powertrain and process design
    • —IATF 16949 supply chains requiring DFMEA and robust design
    • —200,000+ unfilled engineering and manufacturing roles
    • —Lean and Six Sigma methods valued in Czech job listings
    • —Nearshoring strengthening the Czech manufacturing base
    • —Cost and warranty pressure driving design-for-quality

    Sources: platy.cz, ERI SalaryExpert, Glassdoor, worldsalaries (Czechia) 2026; ManpowerGroup Employment Outlook 2026; expats.cz Czech labour market 2026.

    Market Pressures Driving Demand for DFSS in Czechia

    EV Transition Reshaping Design

    Czech automotive is retooling for electric vehicles, so teams must design new powertrains, batteries and processes right the first time rather than fix them after costly launches.

    DFSS builds new product and process design skills

    IATF 16949 Design Demands

    Tier 1 and Tier 2 suppliers to Skoda, Hyundai and Toyota must evidence Design FMEA and robust design under automotive quality rules, exactly the tools DFSS teaches.

    DFSS builds DFMEA and robust design capability

    Medical Device Design Controls

    Growing Czech medtech manufacturers must meet ISO 13485 design control and verification requirements from the first prototype, where CTQ flow-down and design verification are essential.

    DFSS builds design verification skills

    Engineering Talent Shortage

    With 200,000+ unfilled engineering and manufacturing roles, Czech employers prize engineers who can design quality in and prevent the expensive late redesign that erodes margins.

    DFSS makes design engineers stand out

    Warranty and Cost Pressure

    Margin pressure across Czech manufacturing pushes firms to design out defects early instead of scrapping and reworking at production, the core promise of Design for Six Sigma.

    DFSS builds design-for-quality skills

    Electronics Reliability Demands

    Czech electronics and semiconductor plants need high first-pass yield and field reliability, outcomes that only quality designed in through robust design and tolerancing can deliver.

    DFSS builds robust design and DOE awareness

    Sources: expats.cz and ManpowerGroup (Czech hiring 2026); Glassdoor Czech Republic job listings 2026; industry sector observations.

    DFSS is more than a method. It is how Czech manufacturers design quality in and cut the cost of late defects. Join engineers who design it right first time. Start your journey today.

    Your Czechia Design Career Transformation

    Where Your Design Work Stands Today,

    The Shift DFSS Delivers

    Czechia's manufacturing economy is retooling around electric vehicles, electronics and precision engineering, and employers increasingly separate engineers who can design quality in from those who cannot. Here is which side of that line you want to be on.

    Today

    Defects surface late, forcing costly redesign after launch

    After DFSS

    You design quality in early using DMADV, cutting expensive late rework

    Today

    Customer needs are assumed rather than measured

    After DFSS

    You capture the Voice of the Customer and translate it into measurable CTQs

    Today

    Concept choice driven by the loudest voice in the room

    After DFSS

    You select concepts objectively with a Pugh matrix and de-risk them with DFMEA

    You master DFSS

    Before

    Six Sigma skills limited to improving existing processes with DMAIC

    Now you have

    The DMADV design counterpart to lead new product and process design

    Before

    No structured way to prove a design meets customer requirements

    Now you have

    A design scorecard that tracks every CTQ to verified performance

    Before

    Quality treated as an inspection step at the end of the line

    Now you have

    Quality engineered in from the very first design decision

    Before

    Engineering training that skips statistical design tools

    Now you have

    QFD, DFMEA and robust design tools Czech employers actively seek

    "The gap between improving processes and designing them right first time is a defined skill set, and the manufacturers that matter already know it."

    Join professionals across Czechia who trained with Invensis Learning and made the shift.

    Sources: ERI SalaryExpert, platy.cz, Glassdoor (Czechia) 2026.

    Module 1: Introduction to DFSS

    • Overview of Design for Six Sigma and its role in building quality into products and processes from the start
    • Opportunity identification and project selection criteria for DFSS initiatives
    • DFSS best practices and principles for successful project execution
    • Project close procedures and DFSS project publication requirements

    Module 2: Define Needs

    • Customer needs definition techniques and frameworks for capturing voice of the customer
    • Kano model analysis for categorizing and prioritizing customer requirements
    • Customer loss function and its application in understanding quality expectations
    • QFD house of quality for translating customer needs into design requirements
    • Concept identification methods for generating design directions aligned with customer value

    Module 3: Develop Concept

    • Creativity techniques for generating innovative design concepts
    • TRIZ methodology and its application to design problem solving and innovation
    • Pugh concept selection matrix for evaluating and selecting the best design concept

    Module 4: Design Optimization

    • Optimization and robust assessment principles for improving design performance
    • Parameter design methods and their role in achieving robust product and process designs
    • Taguchi DOE application for identifying optimal design parameters efficiently
    • Tolerance design techniques and quality loss function for managing design variation
    • Noise management strategy for controlling sources of variation in the design

    Module 5: Verify Implementation

    • Verification case study demonstrating DFSS application across the full design cycle
    • DFSS process summary and integration into the product or service development process
    • Project publication and knowledge sharing for DFSS initiative outcomes
    • Design Failure Mode and Effects Analysis (DFMEA) for identifying and mitigating design risks

    Course Curriculumof the Design for Six Sigma Training

    The Design for Six Sigma training course curriculum in the Czechia is structured across five modules, taking learners from an introduction to DFSS principles through to concept development, design optimization, and implementation verification.

    • Overview of Design for Six Sigma and its role in building quality into products and processes from the start
    • Opportunity identification and project selection criteria for DFSS initiatives
    • DFSS best practices and principles for successful project execution
    • Project close procedures and DFSS project publication requirements

    Shifts your thinking from fixing quality problems after launch to designing them out before day one.

    image

    100% Secure and Safe download

    The DFSS Tools You Will Put to WorkA Practical DMADV Toolkit

    This Design for Six Sigma programme builds hands-on capability across the full DMADV toolkit. By the end, you can design quality into new products and processes rather than inspect defects out later, and apply each tool to your own design work.

    Run the DMADV Roadmap End to End

    Apply Define, Measure, Analyse, Design and Verify to take a new product or process from customer need to a verified, launch-ready design that meets Six Sigma quality levels.

    Capture the Voice of the Customer

    Gather and classify customer needs using interviews, observation and the Kano model, separating must-be, performance and delighter requirements before design begins.

    Translate Needs into Measurable CTQs

    Use CTQ flow-down to turn customer language into specific, measurable design targets, so every design decision traces back to a real customer requirement.

    Build a QFD House of Quality

    Map customer requirements to engineering characteristics, set design targets and surface design conflicts using Quality Function Deployment.

    Select the Best Concept with a Pugh Matrix

    Generate multiple design concepts and compare them objectively against a datum to choose, and strengthen, the strongest option through structured scoring.

    Reduce Design Risk with DFMEA

    Identify failure modes, score severity, occurrence and detection, and prioritise design actions by risk priority number before the design is committed.

    Make Designs Robust to Variation

    Apply P-diagram thinking, Taguchi robust design and tolerancing so performance holds despite manufacturing, environmental and usage noise.

    Verify and Validate Before Launch

    Plan verification and validation activities, track a design scorecard against every CTQ, and transfer a proven design cleanly into production.

    Who Should TakeDesign for Six Sigma Training in Czechia?

    Designers

    Design Engineers

    Quality Managers

    Project Managers

    Product Managers

    Materials Engineers

    R&D Directors and Managers

    Six Sigma Black Belt and Green Belt Professionals

    Who Can Take This Certification Training

    Design for Six Sigma Training Modesfor Professionals and Teams

    We offer flexible training formats designed to suit different learning preferences, schedules, and professional goals. Whether you prefer self-paced learning or a structured, corporate, instructor-led experience, choose the option that best supports your skill development journey through the Best Design for Six Sigma online training options available.

    Design for Six Sigma Live Virtual Training

    • Live online instructor-led sessions

    • Interactive discussions and virtual activities

    • Expert guidance from experienced trainers

    • Practice assessments and revision support

    • Dedicated Q&A sessions for concept clarification

    • Fixed schedules for accountability and momentum

    • Small batch sizes for personalized attention

    • Access from any location with internet connectivity

    CZK 8370

    Attend fully interactive weekday Design for Six Sigma training sessions from anywhere while benefiting from real-time instructor guidance and collaborative learning experiences.

    Untitled

    Best For: Professionals seeking the flexibility of online learning without compromising on live instructor interaction.

    Untitled

    Design for Six Sigma Classroom Training

    • Instructor-led classroom sessions

    • Interactive discussions and group activities

    • Real-world examples and practical exercises

    • Structured learning with fixed schedules

    • Opportunities for peer networking and collaboration

    • Practice assessments and knowledge checks

    • Dedicated Q&A and concept clarification

    • Immediate trainer feedback and support

    Untitled

    Learn through face-to-face sessions led by experienced instructors in a collaborative classroom environment. This classroom Design for Six Sigma training format combines expert guidance, peer interaction, and hands-on activities to create an engaging learning experience.

    Untitled

    Best For: Learners who prefer in-person interaction, structured schedules, and collaborative learning experiences.

    Untitled

    Design for Six Sigma Corporate Group Training

    • Customized training aligned to organizational goals

    • Flexible delivery: onsite, virtual, hybrid, or blended

    • Scheduling tailored to business availability

    • Role-based examples and industry-relevant discussions

    • Progress tracking and learner assessments where applicable

    • Dedicated coordination and administrative support

    • Consistent learning experiences across teams

    • Scalable delivery for local, regional, or global workforces

    Untitled

    Designed for organizations that want to build capabilities at scale, standardize knowledge, and support workforce development through customized team learning initiatives and Design for Six Sigma training for companies.

    Untitled

    Best For: Organizations looking to upskill employees, address capability gaps, and deliver consistent training across teams.

    Untitled

    Design for Six Sigma Focused 1-to-1 Training

    • One-to-one instructor attention

    • Customized learning plans and objectives

    • Flexible scheduling based on availability

    • Personalized feedback and coaching

    • Additional focus on challenging topics

    • Targeted practice and revision support

    • Faster clarification of questions and concepts

    • Learning pace is adapted to individual needs

    Untitled

    Receive personalized instruction tailored to your goals, pace, and learning requirements through dedicated sessions delivered by Design for Six Sigma training company.

    Untitled

    Best For: Professionals seeking personalized guidance, accelerated learning, or focused support to achieve specific outcomes.

    Untitled

    Design for Six Sigma Live Virtual Training

    Design for Six Sigma Live Virtual Training

    Live online instructor-led sessions

    Interactive discussions and virtual activities

    Expert guidance from experienced trainers

    Practice assessments and revision support

    Dedicated Q&A sessions for concept clarification

    Fixed schedules for accountability and momentum

    Small batch sizes for personalized attention

    Access from any location with internet connectivity

    Starts from

    CZK 8370

    Please Note:Attend fully interactive weekday Design for Six Sigma training sessions from anywhere while benefiting from real-time instructor guidance and collaborative learning experiences.

    Best For: Professionals seeking the flexibility of online learning without compromising on live instructor interaction.

    Loading schedules…

    Why Choose Invensis Learning in CzechiaTrainer-Led, Real Design Work

    Invensis Learning delivers practical, instructor-led Design for Six Sigma training for engineers, product teams and organisations across Czechia. Our programmes combine trainers with real design experience, hands-on DFSS tool exercises, organised courseware and flexible delivery, so learning transfers straight to your next design project. As a trusted Design for Six Sigma training company in Czechia, we make sure that whether you enrol as an individual or plan group training for a product development team, you get a professional learning experience built around real-world application and measurable outcomes, backed by our ISO 9001:2015 and ISO 27001:2022 certifications.

    • Experienced trainers with real product and process design expertise
    • Hands-on DFSS exercises: VOC, QFD, Pugh matrix and DFMEA on realistic scenarios
    • Flexible formats: live online, classroom and onsite for teams
    • Structured, practical courseware focused on workplace application
    • Customised group training aligned with your design projects
    • Dedicated learner support before, during and after training
    • ISO 9001:2015 and ISO 27001:2022 certified training company
    • Trusted by professionals and manufacturers across many industries

    500+

    Corporate Clients

    15+

    Years of Training Excellence

    24/7

    Learner Support

    50+

    Industries Served

    ISO 9001:2015 Certified

    ISO 9001:2015 Certified

    ISO 27001:2022 Certified

    ISO 27001:2022 Certified

    Secure SSL Encryption

    Secure SSL Encryption

    Leaders in Training industry for 12+ years

    Leaders in Training industry for 12+ years

    Over 5000 five star reviews

    Over 5000 five star reviews

    Level AA conformance, W3C WCAG 2.2

    Level AA conformance, W3C WCAG 2.2

    Design for Six Sigma Training Locations in CzechiaAll our classroom training is now available online at your convenience

    Design for Six Sigma in Czechia

    Hilton Prague Atrium, 311, Pobřežní, Florenc, Karlín, Prague 8, district Prague 8, Prague, 186 00, Czech Republic

    Design for Six Sigma in Czechia

    Grand Hotel Prague Towers, 1655/1, Kongresová, Nusle, Prague 4, district Prague 4, Prague, 140 00, Czech Republic

    corporate banner

    Corporate DFSS TrainingUpskill Engineering Teams at Once

    Untitled

    • Upskill whole product, engineering and quality teams together
    • Customised schedules built around your team's availability
    • Flexible delivery: onsite, live virtual or hybrid across Czechia
    • Trainers with real design and manufacturing experience
    • Role-based examples and exercises on your own design projects
    • Dedicated coordination and support for group programmes
    • Scalable delivery for local, regional and global teams

    Trusted by Leading Manufacturers

    Skoda AutoBoschContinentalHoneywellFoxconnSiemens

    What Our Learners Say

    Untitled

    The DMADV Roadmap Made Everything Click

    "The DMADV structure finally connected the tools I half-knew. Building a House of Quality and a DFMEA on a real component during the exercises changed how I start every new design."

    Tomas Novak

    Design Engineer, Automotive Supplier

    Untitled

    0/0

    The Perfect Complement to DMAIC

    "I came from a DMAIC background and wanted the design side. The Voice of the Customer to CTQ flow-down section was worth the day on its own. Very practical and hands-on."

    Jana Svobodova

    Quality Engineer, Electronics Manufacturing

    Untitled

    0/0

    Robust Design Demystified

    "Robust design and the P-diagram gave me a language for something I had been doing by instinct. The trainer used clear, real-world examples throughout."

    Petr Kovar

    R&D Engineer, Precision Engineering

    Untitled

    0/0

    A Shared Design Language for the Team

    "We ran this onsite for our new product development team. Everyone now shares the same DMADV language, and our design reviews are far sharper on customer requirements and design risk."

    Marketa Dvorakova

    NPD Manager, Medical Devices

    Untitled

    0/0

    Tailored Corporate Training That Delivered

    "The corporate session was tailored to our live projects, so the QFD and DFMEA exercises used our own products. Practical, well organised and easy to coordinate for a busy engineering group."

    Ondrej Cerny

    Head of Engineering, Industrial Equipment

    Untitled

    0/0



    Trustpilot

    4.6

    Ratings

    100K+

    Happy Learners

    100+

    Locations Worldwide

    99%

    Training Satisfaction

    Enquire with us now

    Drop us a query and our learning consultant will reach out to you shortly

    Get Course Details & Pricing

    Fill out this form and we will respond quickly.

    We also deliver Design for Six Sigma Trainingacross multiple cities

    Invensis Learning delivers industry-leading Design for Six Sigma training solutions tailored for individuals and organizations.

    Prague
    City map with location markers

    Explore Our Other Course Categories

    Agile

    Project Management

    ITSM

    Quality Management

    DevOps

    IT Governance

    Other Related Courses

    Foundation

    Poka Yoke

    Foundation

    Lean Six Sigma Yellow Belt

    Foundation

    Business Process Management

    Foundation

    Six Sigma Awareness

    Foundation

    7 QC Tools Training

    Advanced

    Lean Six Sigma Black Belt

    Foundation

    Quality Function Deployment

    Foundation

    Lean IT

    Advanced

    Lean Six Sigma Green Belt

    Foundation

    Minitab Essentials

    Foundation

    Design for Six Sigma

    Foundation

    Lean Fundamentals

    Foundation

    Quality by Design

    Foundation

    Lean Manufacturing

    Foundation

    Value Stream Mapping

    Foundation

    Kaizen

    Foundation

    Root Cause Analysis

    Frequently Asked QuestionsHere's everything you may ask...

    Design for Six Sigma training is a one-day, hands-on course that teaches you to design new products, services and processes to Six Sigma quality levels from the start. It covers the DMADV roadmap (Define, Measure, Analyse, Design, Verify) and core tools including VOC, QFD, Pugh concept selection, DFMEA and robust design.

    General

    What is Design for Six Sigma training?

    Design for Six Sigma training is a one-day, hands-on course that teaches you to design new products, services and processes to Six Sigma quality levels from the start. It covers the DMADV roadmap (Define, Measure, Analyse, Design, Verify) and core tools including VOC, QFD, Pugh concept selection, DFMEA and robust design.

    Who should attend this DFSS course in Czechia?

    The course suits design and systems engineers, R&D professionals, new product development managers, quality engineers and Six Sigma practitioners. It is ideal for anyone in Czechia's automotive, electronics, aerospace or medical device sectors who designs new products or processes.

    Is Design for Six Sigma worth it for engineers in Czechia?

    Yes. Czech manufacturers competing on first-time-right design actively value engineers who can design quality in rather than inspect it out. DFSS tools such as DFMEA and robust design are expected across IATF 16949 automotive supply chains and ISO 13485 medtech, making the skill set highly transferable.

    How is DFSS different from DMAIC?

    DMAIC improves existing processes that are underperforming, while DFSS designs new products and processes to meet requirements from the start using the DMADV roadmap. Organisations use both: DMAIC to improve what exists, DFSS to design what is new. This course covers the DFSS side.

    Do I need prior Six Sigma knowledge to join?

    No. There are no prerequisites. Familiarity with basic Six Sigma concepts such as CTQ and variation is helpful but not required, as the course introduces all DFSS tools and the DMADV methodology from first principles.

    Pricing

    How much does Design for Six Sigma training cost in Czechia?

    Pricing depends on the delivery format (live online, classroom or onsite) and group size, and is available on request. The fee covers the full one-day programme, hands-on tool exercises, courseware and learner support. Request a quote and a learning advisor will share current options.

    What is included in the DFSS course fee?

    The fee includes instructor-led delivery of the one-day programme, hands-on exercises across VOC, QFD, Pugh matrix and DFMEA, structured courseware and worked examples, learner support and a course completion record from Invensis Learning.

    Do you offer group or corporate pricing?

    Yes. We offer corporate group training with customised schedules and volume-based pricing for product development, engineering and quality teams. Talk to a learning advisor about a tailored quote for your team in Czechia.

    What payment options are available?

    We accept major credit and debit cards and bank transfers, with instalment options on selected plans. Speak with a learning advisor to choose the option that suits you or your organisation.

    Is the training available online for teams in Czechia?

    Yes. The course is available as online (live virtual) instructor-led training as well as classroom and onsite delivery, so distributed teams across Czechia can attend together. Ask about corporate or group pricing for online cohorts.

    Assessment

    Is there a test to pass on this DFSS course?

    No. This is a non-certification skills course with no formal test. Learning is reinforced through hands-on DFSS tool exercises, real-world design case studies and team discussion throughout the one-day programme.

    What do I receive when I complete the training?

    You receive a course completion record from Invensis Learning that confirms you have completed the Design for Six Sigma programme. The DFSS skills you build are immediately applicable to new product and process design work.

    How is learning reinforced without a test?

    Learning is applied throughout the day. You work through VOC to CTQ flow-down, build a QFD House of Quality, run a Pugh concept selection and complete a DFMEA on realistic design scenarios, so you leave able to use each tool at work.

    Does this training lead to a Six Sigma credential?

    No credential is awarded by this course; it is practical skills training. It complements Lean Six Sigma Green Belt and Black Belt programmes and Minitab Essentials training, all available through Invensis Learning, if you later want to build broader Six Sigma capability.

    Do the DFSS skills expire or need renewal?

    No. The methodology and tools you learn do not expire and need no renewal. Once you can run DMADV and apply VOC, QFD, DFMEA and robust design, those skills stay with you across projects and roles.

    Course Content

    What topics does the DFSS course cover?

    The course covers the full DMADV roadmap: Define (project charter, VOC, Kano), Measure (CTQ flow-down, QFD), Analyse (concept generation, Pugh matrix, DFMEA), Design (robust design, P-diagram, DFMA) and Verify (design verification, validation, design scorecard and transfer).

    Can a beginner take this course?

    Yes. The course has no prerequisites and introduces every DFSS tool and the DMADV methodology from first principles, so beginners and experienced engineers alike can follow it and apply the tools straight away.

    Are there hands-on exercises in the training?

    Yes. Practical exercises run throughout the day. You apply VOC to CTQ flow-down, build a QFD House of Quality, use a Pugh matrix to select a concept and complete a DFMEA worksheet, all on realistic product or process design scenarios.

    How long is the Design for Six Sigma training?

    The programme runs for one day (eight hours) and covers all six DMADV areas with concept explanations, real-world examples and hands-on tool exercises. It can also be delivered as two half-days for teams that prefer a split schedule.

    What learning materials are provided?

    You receive structured courseware covering the DMADV methodology and DFSS tools, worked design examples, exercise templates for VOC, QFD, Pugh and DFMEA, and a course completion record on finishing the programme.

    Enrollment

    How do I enrol in the DFSS course in Czechia?

    You can enrol through the Invensis Learning website. Choose your preferred format, complete your booking, and you will receive access to schedules, courseware and joining details. Talk to a learning advisor if you need help choosing a format.

    What training formats are available?

    We offer online (live virtual) instructor-led training, classroom sessions and onsite corporate delivery for teams. Choose the format that best fits your schedule, location and learning preference across Czechia.

    Can I book this as onsite training for my team?

    Yes. Onsite and live virtual group training is available for product development, engineering and quality teams. Corporate delivery is especially effective because your team can apply DFSS tools to your own live design projects during the exercises. Ask about a group quote.

    How soon can I start the training?

    Public schedules run regularly for individual learners, and corporate sessions are arranged around your team's availability. See upcoming schedules or talk to a learning advisor to find the earliest date that works for you.

    Can I reschedule my booking?

    Yes. Flexible options let you reschedule or transfer to another batch on selected plans. Contact our support team and they will help you arrange a suitable alternative date.