Course Overview

    Overview

    Course Highlights

    Eligibility Criteria

    Benefits

    Exam Format

    What Will You Learn to Do with the Seven QC Tools?UntitledA Practical Quality Toolkit

    The 7 QC Tools Training in Malaysia is a hands-on programme that teaches the seven core quality control tools (Seven Quality Control Tools) used to identify, analyse and solve quality problems on the shop floor and in service operations. Formalised by Kaoru Ishikawa, these tools are the practical backbone of ISO 9001:2015 quality management, Six Sigma DMAIC and Lean improvement work across Malaysian industry. Built for quality engineers, production supervisors and process improvement practitioners, the course moves through the Cause-and-Effect (Fishbone) Diagram, Check Sheet, Control Chart, Histogram, Pareto Chart, Scatter Diagram and Stratification or Flow Chart. Each tool is taught with worked examples and practice exercises, so you can apply it to real defects the day after training. With Malaysia's electronics, semiconductor and medical device sectors under constant pressure to raise yield and reduce waste, professionals who can read data and drive root cause analysis are in demand. Start building that capability with Invensis Learning.

    What Will You Learn to Do with the Seven QC Tools?A Practical Quality Toolkit

    The 7 QC Tools Training in Malaysia is a hands-on programme that teaches the seven core quality control tools (Seven Quality Control Tools) used to identify, analyse and solve quality problems on the shop floor and in service operations. Formalised by Kaoru Ishikawa, these tools are the practical backbone of ISO 9001:2015 quality management, Six Sigma DMAIC and Lean improvement work across Malaysian industry.

    Built for quality engineers, production supervisors and process improvement practitioners, the course moves through the Cause-and-Effect (Fishbone) Diagram, Check Sheet, Control Chart, Histogram, Pareto Chart, Scatter Diagram and Stratification or Flow Chart. Each tool is taught with worked examples and practice exercises, so you can apply it to real defects the day after training.

    With Malaysia's electronics, semiconductor and medical device sectors under constant pressure to raise yield and reduce waste, professionals who can read data and drive root cause analysis are in demand. Start building that capability with Invensis Learning.

    Certification Badge

    Key Highlightsof the 7 QC Tools Training Training Course

    End-to-End Skill Development

    • Structured 7 QC Tools training in the Malaysia designed to help learners understand the core concepts, tools, methods, and practices covered in the program through instructor-led 7 QC Tools training
    • Course content aligned with current industry expectations, workplace requirements, and practical learning objectives for quality management professionals in the Malaysia seeking a 7 QC Tools course online
    • Real-world examples and scenario-based learning delivered through 7 QC Tools training online to help learners connect quality control concepts with everyday professional situations across manufacturing, healthcare, IT, and services
    • Guided learning support to help participants strengthen understanding, improve confidence, and apply the 7 QC Tools effectively at work through a structured 7 QC Tools training program

    Structured Courseware and Learning Resources

    • Access to organized 7 QC Tools course materials including Pareto chart templates, fishbone diagram worksheets, control chart reference cards, and scatter diagram plotting guides designed to support step-by-step learning
    • Topic-wise learning resources, exercises, and knowledge checks to reinforce understanding of data collection, analysis, and defect identification techniques
    • Practice activities, assignments, quizzes, or workplace-based exercises included where applicable as part of a 7 QC Tools bootcamp
    • Supplementary learning aids such as check sheet designs, histogram construction guides, flowchart design tools, and QC data analysis worksheets supported through 7 QC Tools coaching

    Instructor-Led, Practical Learning Experience

    • Live interactive sessions delivered by experienced quality management practitioners with relevant domain expertise across manufacturing, process improvement, and quality assurance
    • Real-world examples, case discussions, and applied quality analysis activities to improve practical understanding of each of the seven tools
    • Opportunities to ask questions, clarify doubts, and participate in trainer-led discussions on defect analysis, root cause identification, and process stability assessment
    • Training approach focused on helping learners use the 7 QC Tools at work, not just complete the course content

    Flexible Learning Support in Malaysia

    • Flexible training formats available for individual learners and corporate teams in the Malaysia
    • Options may include live virtual classroom training, onsite training, self-paced learning, or customized group training depending on availability
    • Learning support designed to help participants stay on track before, during, and after the 7 QC Tools training
    • Additional revision, refresher, or post-training support may be available based on the selected course

    Learn the Core Concepts Covered in the Course

    • Understand foundational quality control principles and how the seven tools work together to support continuous improvement and defect reduction
    • Learn Pareto analysis, fishbone diagramming, control chart interpretation, and scatter diagram plotting based on the course curriculum
    • Explore practical use cases showing how the 7 QC Tools are applied across manufacturing, healthcare, IT, and service delivery environments
    • Build role-relevant knowledge of data collection methods, process flow analysis, and statistical quality techniques that support better decision-making and workplace performance

    Practice, Assessment, and Completion Support

    • Practice constructing Pareto charts, control charts, histograms, and scatter diagrams through quizzes, exercises, and scenario-based activities where applicable
    • Use assessments to identify knowledge gaps in quality control concepts and strengthen understanding of weaker areas
    • Receive guidance from instructors or learning support teams to improve understanding of tool application and stay aligned with course objectives
    • Earn a course completion certificate after successfully meeting the training requirements

    Career and Workplace Application

    • Build practical quality management skills that can support career growth, role advancement, or improved job performance in the Malaysia
    • Strengthen confidence in applying Pareto analysis, fishbone diagrams, control charts, and other quality tools to real-world process improvement challenges
    • Improve professional credibility through structured, skill-focused 7 QC Tools training recognized across Malaysia industries
    • Support organizational capability building when delivered as corporate or team training across quality, manufacturing, operations, and healthcare sectors

    7 QC Tools Training Eligibility in the MalaysiaWho Can Enroll?

    • No prior quality control experience is required to enroll; the 7 QC Tools training is open to all working professionals in the Malaysia

    • Basic familiarity with workplace processes or quality concepts is helpful but not mandatory for enrollment

    • Professionals from manufacturing, healthcare, IT, and service sectors will find the course immediately applicable to their roles

    • Quality control professionals, supervisors, process improvement specialists, and Lean Six Sigma practitioners are well suited for this training

    • Anyone seeking to strengthen data analysis, defect identification, and process improvement skills in the Malaysia will benefit from this program

    What You Gain from the Seven QC ToolsSkills You Apply from Day One

    For Individuals

    For Individuals

    The seven QC tools give you a practical, data-based way to tackle everyday quality problems. You learn to collect the right data, find the real cause, and prove whether a change worked, skills that make you more effective in any quality, production or engineering role. Whether you work in electronics, medical devices, automotive or food and beverage, these tools turn scattered observations into clear decisions. That is what employers across Malaysia value in a strong quality professional.

    If you want to move from reacting to defects to preventing them, this programme is a clear starting point. You leave able to run root cause analysis, build control charts and drive measurable improvement in your day-to-day work.

    • Diagnose the true root cause of defects with fishbone and Pareto analysis, not guesswork
    • Read process data confidently using histograms and control charts
    • Prioritise the vital few problems that drive most of your quality costs
    • Build a shared problem-solving language your whole quality team can use
    • Support ISO 9001, Six Sigma and Lean work with tools employers expect
    • Apply every tool to your own workplace defects immediately after the programme
    • Strengthen your profile for quality engineer and process improvement roles across Malaysian manufacturing
    For Organizations

    For Organizations

    Group training in the seven QC tools helps organisations build a consistent, data-driven approach to quality. Teams learn to speak the same problem-solving language, whether they sit in quality assurance, production or process engineering. For manufacturers under pressure to raise yield and control cost, a shared toolkit means faster, more reliable improvement across every line and site.

    If your teams tackle defects differently from shift to shift, this training creates a common method for finding and fixing root causes. That consistency is what turns quality data into sustained improvement.

    • Standardise quality problem-solving across production, engineering and quality teams
    • Reduce defects, rework and scrap by acting on data rather than opinion
    • Improve first-pass yield and process capability on the shop floor
    • Support ISO 9001:2015 monitoring, measurement and improvement requirements
    • Build in-house root cause analysis capability across shifts and lines
    • Train cross-functional teams together for one common quality toolkit
    • Deliver measurable improvement through flexible on-site or live online sessions

    Quality Careers the 7 QC Tools Open in MalaysiaRoles, Sectors and Demand

    Malaysia's manufacturers compete on quality, and the seven QC tools sit at the heart of that. From Penang's electronics and medical device clusters to semiconductor plants in Kulim and factories across the Klang Valley, employers want people who can run root cause analysis, control charts and Pareto studies, the practical skills that 7 QC Tools training builds. Demand is strongest in quality engineering and process improvement, and here is what the market looks like now.

    RM54,000

    Quality Engineer average pay, Malaysia

    per year, PayScale 2026

    50,000

    Skilled engineers the industry needs

    semiconductor demand, 2026

    RM28.5bn

    E&E approved investment, 2025

    MIDA 2026

    4,900+

    Continuous improvement roles listed

    Glassdoor Malaysia 2026

    SECTORS HIRING

    • —Electronics and Semiconductors (E&E)
    • —Medical Devices and Healthcare Manufacturing
    • —Automotive and Precision Engineering
    • —Pharmaceuticals, Food and Beverage
    • —Rubber, Gloves and Industrial Products
    • —Oil, Gas and Petrochemicals

    GROWTH TRENDS

    • —Semiconductor investment expanding assembly, test and advanced packaging
    • —National Semiconductor Strategy targeting 60,000 engineers by 2030
    • —AI, data centre and EV demand raising quality and yield expectations
    • —Penang medical device cluster scaling ISO 13485 quality needs
    • —Move up the value chain increasing demand for data-driven quality skills
    • —Persistent engineering talent gap across manufacturing

    Sources: PayScale, Glassdoor, Jobstreet, SalaryExpert (Malaysia) 2026; MIDA, MSIA, InvestPenang 2026.

    Quality Challenges Driving Demand for the Seven QC Tools

    Talent Gap in Quality Engineering

    Malaysia's semiconductor sector needs around 50,000 skilled engineers while universities graduate roughly 5,000 a year, leaving quality and process roles hard to fill.

    The seven QC tools build in-demand quality skills

    Rising Yield and Defect Pressure

    AI, data centre and EV demand pushes electronics makers to raise first-pass yield, so teams that can apply control charts and Pareto analysis are increasingly valued.

    Control charts and Pareto analysis lift yield

    Moving up the Value Chain

    As plants shift from assembly and test into advanced packaging and design, data-driven root cause analysis becomes essential to hold quality at greater complexity.

    Data-driven root cause analysis at higher complexity

    Regulated and ISO-Driven Quality

    Medical device and pharmaceutical makers must evidence data analysis and corrective action under ISO 13485 and ISO 9001:2015, exactly what the seven tools support.

    The tools support ISO 13485 and ISO 9001 work

    Costly Scrap and Rework

    Margin pressure across manufacturing makes waste expensive, and the QC tools help teams find the vital few causes behind most defects and rework.

    Find the vital few causes behind most defects

    Inconsistent Problem-Solving

    Without a shared toolkit, teams tackle defects by opinion. The seven QC tools give production, engineering and quality a common, data-based method.

    A shared, data-based method for every team

    Sources: MSIA, MIDA, InvestPenang, industry reports (Malaysia) 2026.

    The seven QC tools are the fastest way to turn quality data into action. Join Malaysian professionals building practical problem-solving skill. Start today.

    Your Malaysia Quality Career Transformation

    From Firefighting Defects to Data-Driven Quality

    The Shift the Seven QC Tools Deliver

    Malaysia's manufacturers increasingly separate teams that solve problems with data from those that simply react to defects. Here is which side of that line the seven QC tools put you on.

    Today

    You react to defects as they appear, with little data behind decisions

    After Training

    You use check sheets, Pareto and control charts to act on evidence, not opinion

    Today

    Root causes stay hidden, so the same problems keep returning

    After Training

    You trace true root causes with fishbone analysis and fix problems for good

    Today

    Quality skills feel informal and hard to prove to employers

    After Training

    You hold a practical toolkit valued across Malaysia's manufacturing sector

    You master the seven QC tools

    Before

    Quality problem-solving that varies from person to person

    Now you have

    A structured, repeatable method your whole team can share

    Before

    Data sitting in spreadsheets without clear insight

    Now you have

    The skill to turn raw data into histograms, Pareto charts and control charts that guide action

    Before

    Improvement work that stalls without the right tools

    Now you have

    Seven proven tools that support ISO 9001, Six Sigma and Lean projects

    Before

    Career growth limited to your current role

    Now you have

    Readiness for quality engineer and process improvement roles

    "In Malaysian manufacturing, the difference between a good quality team and a great one is often whether they let the data do the talking."

    Join professionals across Malaysia who trained with Invensis Learning and made the shift.

    Sources: PayScale, Jobstreet, SalaryExpert (Malaysia) 2026.

    Module 1: Introduction to Quality Control Tools

    • Overview of the 7 QC Tools and their role in quality management and process improvement
    • Importance of data-driven decision-making in quality control and continuous improvement programs
    • Evolution of quality control tools and their integration with Lean, Six Sigma, and total quality management
    • How the seven tools work together to identify, analyse, and resolve quality problems in the workplace

    Module 2: Pareto Chart

    • Understanding Pareto analysis and the 80/20 principle in quality and defect management
    • Constructing a Pareto chart from raw defect and frequency data
    • Interpreting Pareto charts to prioritize quality improvement efforts and resource allocation
    • Applying Pareto analysis to manufacturing, service, and process improvement scenarios

    Module 3: Cause and Effect Diagram (Fishbone)

    • Creating cause and effect diagrams to identify root causes of quality problems
    • Categorizing causes across man, machine, method, material, measurement, and environment
    • Facilitating root cause analysis sessions using the fishbone diagram structure
    • Applying fishbone diagrams to defect investigation and corrective action planning

    Module 4: Check Sheet

    • Designing check sheets for structured and consistent data collection in quality environments
    • Selecting the appropriate check sheet type for defect recording, frequency analysis, and location mapping
    • Collecting quality data using check sheets in manufacturing, service, and process settings
    • Analysing check sheet data to identify patterns, trends, and improvement opportunities

    Module 5: Histogram

    • Constructing histograms from quality and process measurement data
    • Interpreting data distribution patterns including normal, skewed, bimodal, and out-of-control distributions
    • Using histograms to assess process capability and identify variation sources
    • Applying histogram analysis to production data, measurement systems, and service delivery metrics

    Module 6: Scatter Diagram

    • Plotting scatter diagrams to visualize the relationship between two process variables
    • Identifying positive, negative, and no-correlation patterns in quality and process data
    • Conducting trend analysis using scatter diagrams to support root cause investigation
    • Applying scatter diagram analysis to process optimization and variable relationship studies

    Module 7: Control Charts

    • Understanding control charts and their role in monitoring process stability over time
    • Constructing X-bar and R charts for variable data and interpreting control limits
    • Using p-charts and c-charts for attribute data including defect proportions and defect counts
    • Identifying out-of-control signals, trends, and special cause variation in control chart data
    • Applying control charts to production monitoring, quality audits, and process capability assessment

    Module 8: Flowchart

    • Creating process flow diagrams to map and visualize workflow sequences and decision points
    • Using standard flowchart symbols for processes, decisions, inputs, outputs, and connectors
    • Conducting workflow analysis to identify inefficiencies, bottlenecks, and improvement opportunities
    • Applying flowcharting to quality process documentation, procedure mapping, and improvement planning

    Module 9: Implementation Strategies and Case Studies

    • Planning the deployment of the 7 QC Tools within a quality improvement project or program
    • Selecting the right tool for each stage of a quality problem-solving process
    • Reviewing case studies from manufacturing, healthcare, IT, and services showing real-world 7 QC Tools application
    • Building an implementation roadmap for integrating the 7 QC Tools into ongoing quality management activities

    Course Curriculumof the 7 QC Tools Training

    The 7 QC Tools training curriculum in the Malaysia is structured across nine modules covering all seven core quality tools plus implementation strategies and real-world case studies. The program is designed to be practical, with each module aligned to real quality improvement responsibilities and workplace scenarios across manufacturing, healthcare, IT, and service sectors.

    • Overview of the 7 QC Tools and their role in quality management and process improvement
    • Importance of data-driven decision-making in quality control and continuous improvement programs
    • Evolution of quality control tools and their integration with Lean, Six Sigma, and total quality management
    • How the seven tools work together to identify, analyse, and resolve quality problems in the workplace

    These 7 simple tools quietly power quality control programs from car factories to hospital labs.

    image

    100% Secure and Safe download

    The Seven Tools You Will MasterA Complete Quality Toolkit

    Skills covered in the 7 QC Tools programme span all seven quality control tools, each taught with worked examples and hands-on practice. By the end you can select and apply the right tool to real quality problems in your workplace.

    Cause-And-Effect (Fishbone) Diagrams

    Map and drill into the potential causes of a defect using the 6M framework (Man, Machine, Method, Material, Measurement, Environment), and facilitate a team root cause session that reaches the real cause instead of the symptom.

    Check Sheets for Reliable Data

    Design simple, structured check sheets that capture defect type, location and frequency at the point of occurrence, turning shop-floor observations into objective data you can analyse and act on.

    Control Charts and SPC

    Read control charts to tell common cause variation from special cause signals, choose the right chart for your data, and use statistical process control to keep processes stable and capable.

    Histograms and Distribution

    Build histograms to reveal the shape, spread and central tendency of your process data, spot skew, bimodal patterns and outliers, and check output against specification limits.

    Pareto Analysis and the 80/20 Rule

    Apply the Pareto principle to separate the vital few causes from the trivial many, so your team focuses improvement effort where it removes the most defects, cost or complaints.

    Scatter Diagrams and Correlation

    Plot two variables to test whether a suspected cause really drives a quality outcome, judge how strong the correlation is, and avoid the trap of mistaking correlation for causation.

    Stratification and Flow Charts

    Separate data by machine, shift, operator or line to expose hidden patterns, and map process flow with standard symbols to reveal bottlenecks, rework loops and quality risks.

    Choosing the Right Tool

    Learn how the seven tools work together in a quality investigation, moving from check sheet to Pareto to fishbone to scatter and control chart, so you always pick the right tool for the problem in front of you.

    Who Should Take7 QC Tools Training in Malaysia?

    Quality Control Professionals

    Manufacturing Specialists

    Process Improvement Experts

    Project Managers

    Data Analysts

    QA Specialists

    Team Leaders and Supervisors

    Lean Six Sigma Practitioners

    Who Can Take This Certification Training

    7 QC Tools Training Modesfor Professionals and Teams

    We offer flexible training formats designed to suit different learning preferences, schedules, and professional goals. Whether you prefer self-paced learning or a structured learning experience, choose the option that best supports your certification and skill development journey.

    7 QC Tools Live Virtual Training

    • Live online instructor-led sessions

    • Interactive discussions and virtual activities

    • Expert guidance from experienced trainers

    • Practice assessments and revision support

    • Dedicated Q&A sessions for concept clarification

    • Fixed schedules for accountability and momentum

    • Small batch sizes for personalized attention

    • Access from any location with internet connectivity

    MYR 1780

    Attend fully interactive virtual 7 QC Tools training sessions from anywhere while benefiting from real-time instructor guidance and collaborative learning experiences.

    Untitled

    Best For: Professionals seeking the flexibility of online learning without compromising on live instructor interaction.

    Untitled

    7 QC Tools Classroom Training

    • Instructor-led classroom sessions

    • Interactive discussions and group activities

    • Real-world examples and practical exercises

    • Structured learning with fixed schedules

    • Opportunities for peer networking and collaboration

    • Practice assessments and knowledge checks

    • Dedicated Q&A and concept clarification

    • Immediate trainer feedback and support

    Untitled

    Learn through face-to-face sessions led by experienced instructors in a collaborative environment. This classroom 7 QC Tools training format combines expert guidance, peer interaction, and hands-on activities to create an engaging learning experience.

    Untitled

    Best For: Learners who prefer in-person interaction, structured schedules, and collaborative learning experiences.

    Untitled

    7 QC Tools Corporate Group Training

    • Customized training aligned to organizational goals

    • Flexible delivery: onsite, virtual, hybrid, or blended

    • Scheduling tailored to business availability

    • Role-based examples and industry-relevant discussions

    • Progress tracking and learner assessments where applicable

    • Dedicated coordination and administrative support

    • Consistent learning experiences across teams

    • Scalable delivery for local, regional, or global workforces

    Untitled

    Designed for organizations that want to build capabilities at scale, standardize knowledge, and support workforce development through Corporate 7 QC Tools training program.

    Untitled

    Best For: Organizations looking to upskill employees, address capability gaps, and deliver consistent training across teams.

    Untitled

    7 QC Tools Focused 1-to-1 Training

    • One-to-one instructor attention

    • Customized learning plans and objectives

    • Flexible scheduling based on availability

    • Personalized feedback and coaching

    • Additional focus on challenging topics

    • Targeted practice and revision support

    • Faster clarification of questions and concepts

    • Learning pace is adapted to individual needs

    Untitled

    Receive personalized instruction tailored to your goals, pace, and learning requirements through dedicated sessions delivered by 7 QC Tools training institute.

    Untitled

    Best For: Professionals seeking personalized guidance, accelerated learning, or focused support to achieve specific outcomes.

    Untitled

    7 QC Tools Live Virtual Training

    7 QC Tools Live Virtual Training

    Live online instructor-led sessions

    Interactive discussions and virtual activities

    Expert guidance from experienced trainers

    Practice assessments and revision support

    Dedicated Q&A sessions for concept clarification

    Fixed schedules for accountability and momentum

    Small batch sizes for personalized attention

    Access from any location with internet connectivity

    Starts from

    MYR 1780

    Please Note:Attend fully interactive virtual 7 QC Tools training sessions from anywhere while benefiting from real-time instructor guidance and collaborative learning experiences.

    Best For: Professionals seeking the flexibility of online learning without compromising on live instructor interaction.

    Loading schedules…

    Your 7 QC Tools Training in Malaysia, Delivered by Invensis LearningA Trusted Quality Training Partner

    Invensis Learning delivers practical, instructor-led 7 QC Tools training for professionals and teams across Malaysia. As an ISO 9001:2015 and ISO 27001:2022 certified 7 QC Tools training company in Malaysia, we pair experienced quality trainers with hands-on courseware, so learners leave able to apply every tool at work. Whether you join an individual live online session or arrange on-site training for your plant, you get a structured, workplace-focused experience built around real quality problems and measurable outcomes.

    • ISO 9001:2015 and ISO 27001:2022 certified training provider you can trust
    • Experienced quality practitioners who apply the tools in real manufacturing settings
    • Hands-on, exercise-led sessions rather than slide-only theory
    • Flexible delivery through live online (virtual) and on-site classroom formats
    • Course completion certificate from Invensis Learning on finishing the programme
    • Corporate and group training tailored to your plant and sector
    • Global training provider with local support across Malaysia
    • Dedicated learner support before, during and after training

    4

    Flexible Learning Modes

    98%

    First-Attempt Pass Rate

    5000+

    Accredited Trainers Globally

    4.7/5

    Rated by Learners Worldwide

    ISO 9001:2015 Certified

    ISO 9001:2015 Certified

    ISO 27001:2022 Certified

    ISO 27001:2022 Certified

    Secure SSL Encryption

    Secure SSL Encryption

    Leaders in Training industry for 12+ years

    Leaders in Training industry for 12+ years

    Over 5000 five star reviews

    Over 5000 five star reviews

    Level AA conformance, W3C WCAG 2.2

    Level AA conformance, W3C WCAG 2.2

    7 QC Tools Training Locations in the MalaysiaAll our classroom training is now available online at your convenience

    7 QC Tools Training in Malaysia

    Berjaya Times Square Hotel, 1, Jln Imbi, Bukit Bintang, 55100 Kuala Lumpur, Wilayah Persekutuan Kuala Lumpur, Malaysia

    7 QC Tools Training in Malaysia

    Pullman Kuala Lumpur City Centre, 4, Jalan Conlay, Kuala Lumpur, 50450 Kuala Lumpur, Wilayah Persekutuan Kuala Lumpur, Malaysia

    corporate banner

    Corporate 7 QC Tools TrainingUpskill Your Plant in Malaysia

    Untitled

    • Train quality, production and engineering teams together in one shared toolkit
    • Flexible on-site, live virtual or blended delivery around shift schedules
    • Sessions tailored to your sector, from electronics to medical devices
    • Real defects from your plant used as training examples
    • Group pricing for departments and multi-site teams
    • Experienced trainers with a hands-on manufacturing quality background
    • Progress tracking and post-training support for your team

    Trusted by Manufacturing Teams

    IntelInfineonWestern DigitalB. BraunBoschFlex

    What Our Learners Say

    Untitled

    From Guesswork to Real Root Cause Analysis

    "The fishbone and Pareto sessions changed how our line handles defects. Instead of arguing about causes, we now collect data and let the charts point us to the real problem. I applied it to a solder defect the week after training."

    Tan Wei Ming

    Quality Engineer, Electronics Manufacturer

    Untitled

    0/0

    Practical Tools I Use Every Day

    "Very practical and easy to follow, even without a strong statistics background. The check sheet and control chart exercises were things I could use on the shop floor straight away. The trainer used examples close to our own work."

    Nurul Aina Binti Rahman

    Production Supervisor

    Untitled

    0/0

    Clear, Hands-On and Well Paced

    "A solid grounding in all seven tools in a single day. The scatter diagram and stratification parts helped me see patterns in our defect data that we had been missing. Good pace and plenty of hands-on practice."

    Suresh Kumaran

    Process Improvement Executive

    Untitled

    0/0

    A Shared Toolkit Lifted Our Whole Team

    "We ran this as on-site training for our quality and production teams. Everyone now shares the same problem-solving language, which has made our CAPA reviews far more focused. Scrap on two lines is already trending down."

    Lim Chee Keong

    Quality Manager, Medical Device Manufacturer

    Untitled

    0/0

    Well Tailored Corporate Training

    "Invensis Learning tailored the examples to our electronics operation and delivered flexibly around our shifts. The team came away able to build control charts and Pareto analyses without hand-holding. Strong return for a one-day programme."

    Aisyah Mohd

    Learning and Development Lead, Electronics Manufacturer

    Untitled

    0/0



    Trustpilot

    4.6

    Ratings

    100K+

    Happy Learners

    100+

    Locations Worldwide

    99%

    Training Satisfaction

    Enquire with us now

    Drop us a query and our learning consultant will reach out to you shortly

    Get Course Details & Pricing

    Fill out this form and we will respond quickly.

    We also deliver 7 QC Tools Trainingacross multiple cities

    Invensis Learning delivers industry-leading 7 QC Tools Training training solutions tailored for individuals and organizations.

    Johor BahruKuala Lumpur
    City map with location markers

    Explore Our Other Course Categories

    Agile

    Project Management

    ITSM

    Quality Management

    DevOps

    IT Governance

    Other Related Courses

    Foundation

    Poka Yoke

    Foundation

    Lean Six Sigma Yellow Belt

    Foundation

    Business Process Management

    Foundation

    Six Sigma Awareness

    Foundation

    7 QC Tools Training

    Advanced

    Lean Six Sigma Black Belt

    Foundation

    Quality Function Deployment

    Foundation

    Lean IT

    Advanced

    Lean Six Sigma Green Belt

    Foundation

    Minitab Essentials

    Foundation

    Design for Six Sigma

    Foundation

    Lean Fundamentals

    Foundation

    Quality by Design

    Foundation

    Lean Manufacturing

    Foundation

    Value Stream Mapping

    Foundation

    Kaizen

    Foundation

    Root Cause Analysis

    Frequently Asked QuestionsHere's everything you may ask...

    The 7 QC Tools Training is a practical, non-certification programme covering the seven core quality control tools used to identify, analyse and solve quality problems. The tools are the Cause-and-Effect (Fishbone) Diagram, Check Sheet, Control Chart, Histogram, Pareto Chart, Scatter Diagram and Stratification or Flow Chart.

    General

    What is the 7 QC Tools Training?

    The 7 QC Tools Training is a practical, non-certification programme covering the seven core quality control tools used to identify, analyse and solve quality problems. The tools are the Cause-and-Effect (Fishbone) Diagram, Check Sheet, Control Chart, Histogram, Pareto Chart, Scatter Diagram and Stratification or Flow Chart.

    Who should attend the 7 QC Tools course in Malaysia?

    It suits quality engineers, quality analysts, production supervisors, process improvement practitioners and operations managers across Malaysian manufacturing and service industries. Anyone who works with quality data or defect reduction will benefit, from electronics and semiconductors to medical devices and food and beverage.

    What are the seven QC tools covered in the training?

    The seven tools are the Cause-and-Effect (Fishbone) Diagram, Check Sheet, Control Chart, Histogram, Pareto Chart, Scatter Diagram, and Stratification or Flow Chart. Each is taught with concept explanation, worked examples and hands-on practice so you can apply it at work.

    Is the 7 QC Tools Training worth it for my career?

    Yes. Malaysia's manufacturers need people who can drive data-based root cause analysis, and these tools are the practical foundation of quality engineering and process improvement roles. Quality engineers in Malaysia earn around RM54,000 a year on average, and the skills apply directly on the job. Talk to a learning advisor to get started.

    Do I need prior quality experience to join?

    No. There are no formal prerequisites. The seven tools were designed by Kaoru Ishikawa to be accessible to everyone, and the course covers each tool from first principles, so beginners and experienced practitioners can both follow along.

    Pricing

    How much does the 7 QC Tools Training cost in Malaysia?

    Pricing varies by delivery mode, group size and whether the training is public or on-site, so it is available on request. Contact Invensis Learning for a quote in Malaysian Ringgit that matches your format and team size.

    What is included in the course fee?

    The fee typically includes instructor-led sessions covering all seven tools, worked examples and practice exercises, downloadable learning materials, and a course completion certificate from Invensis Learning. Request a quote to see exactly what your chosen format includes.

    Do you offer group or corporate pricing?

    Yes. We offer group and corporate rates for teams and departments, with tailored on-site or live online delivery. Ask about group pricing for your plant or business unit and we will prepare a quote.

    What payment options are available?

    We accept major credit and debit cards and bank transfers, and can arrange invoicing for corporate bookings. Speak with a learning advisor to choose the option that suits you or your organisation.

    Is the training quoted in Malaysian Ringgit?

    Yes. For learners and teams in Malaysia we can quote the training in Malaysian Ringgit. Reach out for current pricing and upcoming batch details.

    Assessment

    Is the 7 QC Tools Training a certification course?

    No. It is a practical, non-certification skills programme. There is no examination and no external credential; learning is reinforced through hands-on exercises and discussion. On completion you receive a course completion certificate from Invensis Learning.

    What will I receive on completing the programme?

    You receive a course completion certificate from Invensis Learning that recognises your participation in the 7 QC Tools programme. More importantly, you leave able to apply all seven tools to real quality problems in your workplace.

    How is learning reinforced during the training?

    Each tool is taught through concept explanation, worked examples and hands-on practice exercises. You apply the tools to realistic quality scenarios during the session, so you build genuine skill rather than sit a formal assessment.

    How do the seven QC tools relate to ISO 9001 and Six Sigma?

    The tools are the practical backbone of quality improvement. ISO 9001:2015 expects organisations to analyse data and act on nonconformities, and the seven tools support that directly. They are also core to the Measure and Analyse phases of Six Sigma DMAIC and to Lean and TQM work.

    Are the seven QC tools recognised by employers in Malaysia?

    Yes. The seven QC tools are universally used in quality management and are expected knowledge in Malaysia's electronics, semiconductor, medical device and automotive sectors, where employers rely on data-driven defect reduction and process control every day.

    Course Content

    What will I learn in the 7 QC Tools Training?

    You will learn to build and apply all seven tools: fishbone diagrams for root cause analysis, check sheets for data collection, control charts for statistical process control, histograms, Pareto analysis, scatter diagrams, and stratification or flow charts. You also learn how the tools work together in a quality investigation.

    How long is the programme?

    The 7 QC Tools Training is delivered as an intensive one-day, eight-hour programme covering all seven tools with concept explanations, worked examples and hands-on exercises. It can also be arranged as two half-day sessions for corporate groups.

    Are there hands-on exercises?

    Yes. Every tool includes practical exercises using realistic quality scenarios, so you practise constructing and interpreting each tool during the session. This hands-on focus is what lets you apply the tools at work straight away.

    What learning materials are provided?

    You receive structured courseware, worked examples and practice exercises for each of the seven tools, plus reference material you can use on the job. For corporate sessions, examples can be tailored to your own products and defects.

    Does the course cover Stratification or the Flow Chart?

    Both are covered. Stratification is taught as a technique for separating data into subgroups to reveal hidden patterns, and the Flow Chart is covered as a way to map and improve process flow. Together they complete the seven-tool toolkit.

    Enrollment

    How do I enrol in the 7 QC Tools Training in Malaysia?

    You can enrol through the Invensis Learning website or by contacting a learning advisor. Choose your preferred format, confirm your place, and you will receive schedule details and joining information. See upcoming batches to pick a date that suits you.

    What training formats are available?

    The programme is available as live online (virtual) instructor-led training and as on-site classroom training for teams. Individuals can join a scheduled online session, while organisations can arrange on-site delivery at their facility in Malaysia.

    When are the upcoming batches?

    New public sessions are scheduled regularly, and corporate on-site training can be arranged on dates that fit your team. Contact a learning advisor to see the next available batches and reserve your place.

    Can you deliver the training on-site at our facility in Malaysia?

    Yes. We deliver on-site 7 QC Tools training at your premises for teams and departments across Malaysia, with examples tailored to your sector and processes. Request a group quote to arrange a session.

    What is the reschedule or cancellation policy?

    Rescheduling and cancellations are handled per our published policy, and we aim to be flexible where schedules change. Contact our team for the details that apply to your booking before you enrol.