Lean Manufacturing Training in Saudi Arabia

Cut Waste, Lift Output on the Floor

Built for production managers, engineers, supervisors and quality professionals across the Kingdom, this instructor-led programme turns Lean theory into shop-floor results in a single day. Learn to remove the eight wastes, map value streams, run 5S and drive Kaizen so your line delivers more with less. Grounded in the Toyota Production System and delivered by Invensis Learning, a trusted Lean Manufacturing training company.

Flexible

Duration

Live

Mode

Hours

1K+ already enrolled

4.8 (350+ Reviews)

7 enrolled this week

26 viewing right now

Want to Train Your Team?

Master Lean Manufacturing and Lead Efficiency in Saudi Arabia

Starts from

SAR 1540

What Is Lean Manufacturing Training and Who Is It For?Your One-Day Route to Waste-Free Production

Lean Manufacturing Training in Saudi Arabia is a one-day, instructor-led programme that teaches you to identify and eliminate waste from production so every step adds value for the customer. It is grounded in the Toyota Production System developed at Toyota by Taiichi Ohno and Shigeo Shingo, and in the five Lean principles that guide every Lean transformation.

You learn the practical Lean toolkit that Saudi factories now rely on: the eight wastes (DOWNTIME), Value Stream Mapping, 5S and visual management, pull systems and kanban, Just-in-Time, Total Productive Maintenance with OEE, standard work, SMED quick changeover, Heijunka and Poka Yoke. Hands-on exercises let you apply each tool to realistic production scenarios.

As Vision 2030 and the National Industrial Development and Logistics Programme expand the Kingdom's factory base, employers want people who can raise output, cut lead time and build a Kaizen culture. This is a practical skills course, so you finish with a course completion record from Invensis Learning and capability you can use the next morning. Start your Lean journey with Invensis Learning.

Key Highlightof the Lean Manufacturing Training Course

End-to-End Skill Development

Structured Lean Manufacturing training in Saudi Arabia designed to help learners understand the core principles, tools, and workflows covered in the program
Course content aligned with current industry expectations, real-world production improvement requirements, and practical learning objectives through a comprehensive Lean Manufacturing training program
Real-world examples and scenario-based learning to help learners connect Lean principles with everyday production, quality, and operations challenges
Guided learning support to help participants strengthen understanding, improve confidence, and apply Lean Manufacturing skills effectively in their roles

Structured Courseware and Learning Resources

Access to organised Lean Manufacturing course materials including Value Stream Mapping templates, 5S audit checklists, and Kaizen event planning guides designed to support step-by-step learning
Topic-wise learning resources, exercises, and knowledge checks to reinforce understanding of waste elimination, flow design, and continuous improvement practices
Practice activities, assignments, and scenario-based exercises to help learners apply Lean tools in realistic production and operations situations using the Online Lean Manufacturing course
Supplementary learning aids such as OEE calculation worksheets, SMED reduction guides, Takt Time reference cards, and Kanban design templates

Instructor-Led, Practical Learning Experience

Live interactive sessions delivered by experienced Lean practitioners with hands-on domain expertise across automotive, electronics, FMCG, and industrial manufacturing sectors
Real-world examples, case discussions, and applied process improvement exercises to deepen practical understanding of Lean tools and techniques
Opportunities to ask questions, clarify doubts, and participate in trainer-led discussions on waste identification, flow analysis, and Kaizen facilitation
Training approach focused on helping learners in Saudi Arabia to use Lean tools confidently at work, not just complete the course content

Flexible Learning Support

Choose from weekend Lean Manufacturing training, live virtual sessions, onsite delivery, or customised group learning based on your schedule and organisational requirements
Options include live virtual classroom training, onsite training, and customised group training depending on availability and organisational requirements
Learning support designed to help participants stay on track before, during, and after the Lean Manufacturing training
Additional revision and post-training support may be available based on the selected course format

Learn the Core Concepts Covered in the Course

Understand the Toyota Production System, Lean philosophy, and the five Lean principles: Value, Value Stream, Flow, Pull, and Perfection
Learn waste identification, Value Stream Mapping, 5S implementation, and Kanban design based on the course curriculum
Explore practical use cases showing how Lean Manufacturing tools are applied in automotive, electronics, healthcare, and service operations environments
Build role-relevant knowledge of OEE improvement, TPM implementation, error-proofing, and continuous improvement that supports better operational decisions

Practice, Assessment, and Completion Support

Practice waste walk exercises, value stream mapping, 5S audits, Kaizen event planning, and OEE calculation through structured activities and simulations
Use assessments to identify knowledge gaps in Lean tools and strengthen understanding of weaker areas
Receive guidance from instructors in Saudi Arabia to improve understanding of Lean principles and stay aligned with course objectives
Earn a course completion certificate after successfully meeting the training requirements

Career and Workplace Application

Build practical Lean Manufacturing skills that can support career growth, role advancement, or improved production and operations performance
Strengthen confidence in applying Value Stream Mapping, 5S, Kaizen, Kanban, and OEE tools to real-world manufacturing and process improvement challenges
Improve professional credibility through structured, skill-focused Lean Manufacturing training recognised across industrial, automotive, FMCG, and service sectors
Strengthen enterprise-wide operational excellence through Lean Manufacturing corporate training for employees across production, quality, engineering, and operations functions

Lean Manufacturing Training EligibilityWho Can Enroll?

No formal prerequisites are required to enroll in the Lean Manufacturing training program in Saudi Arabia
Basic familiarity with production, operations, or quality management concepts is helpful but not mandatory
Professionals with limited prior experience in Lean or continuous improvement tools are welcome to join
Learners from all industries including manufacturing, automotive, FMCG, healthcare, logistics, and service operations can benefit from this training
Individuals and corporate teams in Saudi Arabia seeking to build practical Lean Manufacturing skills are eligible to enroll

What You Gain from Lean Manufacturing SkillsValue on the Floor and in Your Career

For Individuals

Lean Manufacturing training gives production and operations professionals a complete, practical toolkit for eliminating waste and improving flow. It suits engineers, supervisors, team leaders and quality staff who want to make measurable gains on the shop floor. Whether you work in petrochemicals, automotive, food and beverage or building materials, the tools transfer directly to your line and your daily problems.

If you want to be the person who can run a waste walk, map a value stream, stand up a 5S zone and lead a Kaizen event, this programme builds that capability in a single focused day.

Spot and remove the eight wastes to lift daily output and quality
Cut lead time and inventory by creating flow and pull with kanban
Raise equipment uptime using TPM and OEE on your own lines
Bring order and safety to any workspace with 5S and visual management
Lead Kaizen improvements and speak the Lean language employers want
Apply Value Stream Mapping to expose delay and target improvement
Strengthen your standing for production, quality and operational excellence roles
Use every tool immediately, with practical skills you can apply the next day

For Organizations

Lean Manufacturing group training helps Saudi organisations turn operational excellence goals into results by equipping whole teams with a common set of Lean tools. It can be delivered for a plant, a business unit or a cross-functional improvement team. For manufacturers under cost, quality and localisation pressure, shared Lean capability is one of the fastest ways to release capacity and value.

If your teams speak different improvement languages, this training creates one shared approach to waste elimination, flow and Kaizen that scales across sites.

Build a shared Lean language across production, quality and maintenance teams
Reduce waste, lead time and cost across your plants and value streams
Improve OEE and on-time delivery through TPM and standard work
Support In-Kingdom localisation and operational excellence goals
Train cross-functional teams together on your own production challenges
Standardise 5S, kanban and Kaizen practice across business units
Flexible onsite, live virtual and classroom delivery for teams

Where Lean Skills Take Your CareerIn-Demand Roles in Saudi Arabia

Lean skills are in strong demand across Saudi Arabia as Vision 2030 diversifies the economy into manufacturing. From petrochemicals and metals to the fast-growing automotive and food sectors, employers want professionals who can eliminate waste, improve flow and lead continuous improvement. Demand spans production engineers, quality engineers, continuous improvement specialists, production and plant managers, and heads of operational excellence, and here is what the market is showing right now.

11,549

Industrial establishments, KSA

up from 7,206 in 2016, Vision 2030

36,000

Factories targeted by 2035

National Industrial Strategy

219,000+

Jobs targeted by NIDLP

Vision 2030 / NIDLP

SAR 372K

Plant Manager pay, KSA

per year average, PayScale 2026

SECTORS HIRING

—Petrochemicals and Chemicals
—Automotive and Electric Vehicles
—Food and Beverage
—Metals and Mining
—Pharmaceuticals and Life Sciences
—Building Materials and Industrial Equipment

GROWTH TRENDS

—Vision 2030 diversifying the economy into manufacturing
—King Salman Automotive Cluster building a car industry
—NIDLP targeting 219,000+ industrial jobs
—Localisation and In-Kingdom value raising productivity demand
—Operational excellence skills scarce versus demand
—Cost and energy efficiency pressure across plants

Sources: PayScale, Glassdoor, SalaryExpert, GulfTalent (Saudi Arabia) 2026; Vision 2030 / NIDLP, Arab News, PIF.

Designation

Lean Manufacturing Professionals in Saudi Arabia: Salary Insights and Trends

Companies Hiring in Saudi Arabia

SAR112K

Min

SAR180K

Average

SAR328K

Max

PayScale · SalaryExpert (Saudi Arabia) 2026

SABICMa'adenHyundaiCeer

Source: SABIC · Ma'aden · Hyundai · Ceer

Market Forces Making Lean Skills Essential in the Kingdom

Vision 2030 Factory Expansion

Industrial establishments have grown from 7,206 in 2016 to 11,549 in 2023, with 36,000 factories targeted by 2035. New plants need people who can build Lean flow from the start.

Lean skills help new plants run from day one

Automotive and EV Scale-Up

The King Salman Automotive Cluster, Ceer, Lucid and the Hyundai-PIF plant are creating a car industry from scratch, where Lean production, kanban and standard work are core requirements.

Lean production is core to the new car industry

Localisation and In-Kingdom Value

Vision 2030 pushes local content and higher productivity, so manufacturers must do more with local teams. Waste elimination and 5S are the practical route to that goal.

Waste elimination lifts local productivity

Cost and Energy Efficiency Pressure

As subsidies reform and margins tighten, plants are cutting the cost of every unit. Lean tools such as Value Stream Mapping, TPM and OEE directly target the losses that erode profit.

VSM, TPM and OEE target the losses that erode profit

Operational Excellence Talent Gap

Employers list Lean and continuous improvement skills as essential, yet trained talent is scarce. Professionals who can run Kaizen and value stream mapping stand out.

Kaizen and VSM skills make professionals stand out

Food and Pharma Quality Demands

Almarai, SADAFCO and a growing pharma sector run regulated production where Poka Yoke, standard work and 5S protect quality while raising throughput.

Poka Yoke and standard work protect quality

Sources: Vision 2030 / NIDLP, Arab News, PIF, Fast Company Middle East (Saudi Arabia) 2026.

Lean Manufacturing is more than a workshop. It is a practical capability that Saudi factories need now. Join professionals turning waste into value across the Kingdom. Start today.

Your Saudi Arabia Career Transformation

Where You Stand Today,

Your Shift to Lean Capability

Saudi Arabia's manufacturing base is expanding fast under Vision 2030, and employers increasingly separate the people who can run Lean from those who cannot. Here is which side of that line you want to be on.

Today

Seen as a capable operator, but not the person who fixes the system

With Lean Skills

Able to lead waste walks, value stream mapping and Kaizen that raise output and quality

Today

Seen as a capable operator, but not the person who fixes the system

Today

Improvements are ad hoc and rarely stick

With Lean Skills

You embed 5S, standard work and pull systems that hold the gains

Today

Improvements are ad hoc and rarely stick

Today

Pay tied to a single role with limited leverage to move up

With Lean Skills

Plant Manager roles in the Kingdom average around SAR 372,000, with operational excellence heads far higher

Today

Pay tied to a single role with limited leverage to move up

You build Lean capability

Before

Skills limited to your current line and its tools

Now you have

A complete Lean toolkit that transfers across sectors and plants

Before

Skills limited to your current line and its tools

Before

Recognition that depends on years served, not proven capability

Now you have

A demonstrable command of the Toyota Production System that employers value

Before

Recognition that depends on years served, not proven capability

Before

Reacting to breakdowns, delays and defects as they happen

Now you have

The tools to prevent breakdowns and defects: TPM, Poka Yoke and standard work

Before

Reacting to breakdowns, delays and defects as they happen

Before

Improvement ideas that stay stuck inside your own team

Now you have

The confidence to lead Kaizen across the whole value stream

Before

Improvement ideas that stay stuck inside your own team

"The gap between running a line and improving a system is a practical Lean skill set, and Saudi manufacturers already know it."

Join 50,000+ professionals who trained with Invensis Learning and made the shift.

Sources: PayScale, Glassdoor, SalaryExpert (Saudi Arabia) 2026.

Module 1: Foundations of Lean Thinking

Overview of the Toyota Production System (TPS), the history of Lean, and how Lean thinking differs from traditional mass production approaches
Understanding the five Lean principles: Value, Value Stream, Flow, Pull, and Perfection, and how they apply to manufacturing and service environments
Introduction to Lean culture, the leadership role in Lean transformation, and the importance of employee engagement in sustaining continuous improvement

Module 2: Identifying and Eliminating Waste (MUDA, MURA, MURI)

Identifying the eight types of waste: Defects, Overproduction, Waiting, Non-Utilised Talent, Transportation, Inventory, Motion, and Extra Processing
Conducting waste walk exercises to assess current-state operations and prioritise improvement opportunities across production processes
Understanding the difference between MUDA (waste), MURA (unevenness), and MURI (overburden), and applying structured elimination strategies for each

Module 3: Value Stream Mapping (VSM)

Creating current-state value stream maps to visualise the flow of materials and information across the production process
Analysing current-state maps to identify bottlenecks, excess inventory, non-value-added steps, and process cycle efficiency metrics
Designing future-state value stream maps and building improvement roadmaps to close the gap between current and desired production performance

Module 4: 5S Workplace Organisation

Implementing the five steps of 5S: Sort (Seiri), Set in Order (Seiton), Shine (Seiso), Standardise (Seiketsu), and Sustain (Shitsuke)
Conducting 5S workplace assessments, scoring production areas, and identifying corrective actions to improve organisation and visual management
Building 5S sustaining mechanisms including audit schedules, visual controls, and standard work documentation to maintain workplace improvements

Module 5: Just-in-Time (JIT) Production and Kanban

Understanding Just-in-Time production principles including Takt Time analysis, one-piece flow, and pull-based scheduling to reduce inventory and lead times
Designing and implementing Kanban pull systems to manage material flow, signal replenishment, and eliminate overproduction between production stages
Calculating Takt Time, cycle time, and process lead time to balance workload and design efficient production flows aligned with customer demand

Module 6: Kaizen and Continuous Improvement Events

Understanding Kaizen philosophy, the PDCA (Plan-Do-Check-Act) improvement cycle, and the principles of rapid improvement event facilitation
Planning, facilitating, and following up on structured Kaizen events including team selection, problem scoping, root cause analysis, and countermeasure implementation
Building a Kaizen culture through daily improvement habits, idea management systems, and leadership behaviours that sustain continuous improvement momentum

Module 7: Error-Proofing with Poka-Yoke and Jidoka

Understanding error-proofing principles and the difference between detection and prevention approaches to quality control in manufacturing processes
Designing and implementing Poka-Yoke (mistake-proofing) devices and mechanisms to eliminate defects at the source before they reach the next production stage
Applying Jidoka (autonomation) principles to enable machines and operators to detect abnormalities, stop production, and signal for corrective action automatically

Module 8: Total Productive Maintenance (TPM) and OEE

Understanding Total Productive Maintenance principles including the eight pillars of TPM and how TPM supports Lean production by eliminating equipment-related waste
Calculating Overall Equipment Effectiveness (OEE) using Availability, Performance, and Quality components to measure and improve production asset performance
Implementing Autonomous Maintenance practices to involve operators in basic equipment care, inspection, and early defect detection to reduce unplanned downtime

Module 9: Sustaining Lean and Building a Lean Culture

Developing Lean management systems including visual management, daily team meetings, tiered accountability processes, and leader standard work to sustain improvements
Measuring and tracking Lean progress using key performance indicators including lead time, first-pass yield, OEE, inventory turns, and on-time delivery
Building a long-term Lean transformation roadmap, engaging cross-functional teams, and developing internal Lean practitioner capability to drive ongoing operational excellence

Course Curriculumof the Lean Manufacturing Training

The Lean Manufacturing training curriculum in Saudi Arabia is structured across nine modules, taking learners from foundational Lean thinking and waste identification through to advanced production system design, error-proofing, and sustaining continuous improvement culture.

100% Secure and Safe download

Overview of the Toyota Production System (TPS), the history of Lean, and how Lean thinking differs from traditional mass production approaches
Understanding the five Lean principles: Value, Value Stream, Flow, Pull, and Perfection, and how they apply to manufacturing and service environments
Introduction to Lean culture, the leadership role in Lean transformation, and the importance of employee engagement in sustaining continuous improvement

Reframes efficiency as a mindset built into every decision, not a one-time cost-cutting exercise.

Module 1: Foundations of Lean Thinking

Overview of the Toyota Production System (TPS), the history of Lean, and how Lean thinking differs from traditional mass production approaches
Understanding the five Lean principles: Value, Value Stream, Flow, Pull, and Perfection, and how they apply to manufacturing and service environments
Introduction to Lean culture, the leadership role in Lean transformation, and the importance of employee engagement in sustaining continuous improvement

Reframes efficiency as a mindset built into every decision, not a one-time cost-cutting exercise.

100% Secure and Safe download

The Lean Tools You Will Put to WorkA Complete Shop-Floor Toolkit

This Lean Manufacturing training teaches you to apply the full Toyota Production System toolkit to real production problems. By the end of the day you can identify waste, create flow, run pull systems and lead continuous improvement on your own lines.

Eliminate the Eight Wastes (DOWNTIME)

This Lean Manufacturing training teaches you to recognise and remove defects, overproduction, waiting, non-utilised talent, transportation, inventory, motion and extra processing through structured waste walks on the Gemba.

Map Value Streams to Expose Delay

Build current-state and future-state value stream maps, calculate takt time, find the bottleneck and target the steps where lead time and inventory pile up.

Organise Work with 5S and Visual Management

Apply Sort, Set in Order, Shine, Standardise and Sustain, and use andon, boards and floor markings so any abnormality is visible at a glance.

Design Pull Systems with Kanban and JIT

Move from push to pull, size kanban and supermarkets, and apply Just-in-Time so each step makes only what the next one needs, when it needs it.

Raise Reliability with TPM and OEE

Use Total Productive Maintenance and calculate Overall Equipment Effectiveness (Availability x Performance x Quality) to attack the six big losses.

Standardise Work and Speed Changeovers

Write standard work around takt time and work sequence, and apply SMED to convert internal setup to external and cut changeover time.

Level Output and Mistake-Proof the Line

Smooth volume and mix with Heijunka, and build Poka Yoke devices that make defects impossible or immediately visible at the workstation.

Lead Kaizen and Build a Lean Culture

Run daily Kaizen and focused Kaizen events, use A3 problem solving, and apply the leadership behaviours that sustain a Lean manufacturing culture.

Who Should TakeLean Manufacturing Training in Saudi Arabia?

Manufacturing Managers and Plant Managers

Production Supervisors and Team Leaders

Quality Engineers and Quality Managers

Industrial Engineers and Process Engineers

Supply Chain and Operations Professionals

Maintenance Engineers and TPM Coordinators

Professionals transitioning into Lean or process improvement roles

Continuous Improvement (CI) and Operational Excellence Specialists

Who Can Take This Certification Training

Lean Manufacturing Training Modesfor Professionals and Teams

We offer flexible training formats designed to suit different learning preferences, schedules, and professional goals. Whether you prefer self-paced learning or a structured, corporate, instructor-led experience, choose the option that best supports your skill development journey with the best Lean Manufacturing online training options.

Lean Manufacturing Classroom Training

Instructor-led classroom sessions
Interactive discussions and group activities
Real-world examples and practical exercises
Structured learning with fixed schedules
Opportunities for peer networking and collaboration
Practice assessments and knowledge checks
Dedicated Q&A and concept clarification
Immediate trainer feedback and support

Untitled

Learn through face-to-face sessions led by experienced instructors in a collaborative classroom environment. This classroom Lean Manufacturing training in Saudi Arabia combines expert guidance, peer interaction, and hands-on activities to create an engaging learning experience.

Untitled

Best For: Learners who prefer in-person interaction, structured schedules, and collaborative learning experiences.

Untitled

Lean Manufacturing Live Virtual Training

Live online instructor-led sessions
Interactive discussions and virtual activities
Expert guidance from experienced trainers
Practice assessments and revision support
Dedicated Q&A sessions for concept clarification
Fixed schedules for accountability and momentum
Small batch sizes for personalized attention
Access from any location with internet connectivity

SAR 1540

Attend fully interactive online sessions from anywhere while benefiting from real-time instructor guidance and collaborative learning experiences through virtual Lean Manufacturing training.

Untitled

Best For: Professionals seeking the flexibility of online learning without compromising on live instructor interaction.

Untitled

Lean Manufacturing Corporate Group Training

Customized training aligned to organizational goals
Flexible delivery: onsite, virtual, hybrid, or blended
Scheduling tailored to business availability
Role-based examples and industry-relevant discussions
Progress tracking and learner assessments where applicable
Dedicated coordination and administrative support
Consistent learning experiences across teams
Scalable delivery for local, regional, or global workforces

Untitled

Designed for organizations in Saudi Arabia that want to build capabilities at scale, standardize Lean practices, and support workforce development through customized Lean Manufacturing training for companies.

Untitled

Best For: Organizations looking to upskill employees, address capability gaps, and deliver consistent training across teams.

Untitled

Lean Manufacturing Focused 1-to-1 Training

One-to-one instructor attention
Customized learning plans and objectives
Flexible scheduling based on availability
Personalized feedback and coaching
Additional focus on challenging topics
Targeted practice and revision support
Faster clarification of questions and concepts
Learning pace is adapted to individual needs

Untitled

Receive personalized instruction tailored to your goals, pace, and learning requirements through dedicated sessions from trusted Lean Manufacturing training company.

Untitled

Best For: Professionals seeking personalized guidance, accelerated learning, or focused support to achieve specific outcomes.

Untitled

Lean Manufacturing Classroom Training

Instructor-led classroom sessions

Interactive discussions and group activities

Real-world examples and practical exercises

Structured learning with fixed schedules

Opportunities for peer networking and collaboration

Practice assessments and knowledge checks

Dedicated Q&A and concept clarification

Immediate trainer feedback and support

Untitled

Please Note:Learn through face-to-face sessions led by experienced instructors in a collaborative classroom environment. This classroom Lean Manufacturing training in Saudi Arabia combines expert guidance, peer interaction, and hands-on activities to create an engaging learning experience.

Best For: Learners who prefer in-person interaction, structured schedules, and collaborative learning experiences.

Loading schedules…

Why Choose Invensis Learning in Saudi ArabiaPractical, Instructor-Led, Trusted Worldwide

Invensis Learning delivers practical Lean Manufacturing training for professionals and organisations across Saudi Arabia who want to eliminate waste and build operational excellence. Our programmes combine experienced trainers, hands-on exercises and flexible delivery so learning turns into results on the floor. Whether you enrol as an individual or plan team training, Invensis Learning is an ISO 9001:2015 and ISO 27001:2022 certified Lean Manufacturing training company trusted by learners in over 100 countries.

Experienced trainers with real manufacturing and Lean improvement expertise
Hands-on exercises: waste walks, VSM, 5S and OEE on realistic scenarios
Flexible live virtual, classroom and onsite delivery across the Kingdom
Content grounded in the Toyota Production System and proven Lean tools
ISO 9001:2015 quality and ISO 27001:2022 information security standards
Customised team programmes built around your own production challenges
Dedicated learner support before, during and after the training
Course completion record recognised by employers worldwide

98%

First-Attempt Pass Rate

5000+

Accredited Trainers Globally

4.7/5

Rated by Learners Worldwide

500+

Corporate Clients

ISO 9001:2015 Certified

ISO 27001:2022 Certified

Secure SSL Encryption

Leaders in Training industry for 12+ years

Over 5000 five star reviews

Level AA conformance, W3C WCAG 2.2

Lean Manufacturing Training Locations in Saudi ArabiaAll our classroom training is now available online at your convenience

Lean Manufacturing in Saudi Arabia

The Ritz-Carlton Riyadh, Saudi Arabia

Lean Manufacturing in Saudi Arabia

Jeddah Hilton, Corniche Road, Al Shati'a, Jeddah, Jeddah Governorate, Makkah Al Mukarramah Province, 21362, Saudi Arabia

Lean Manufacturing in Saudi Arabia

The Ritz-Carlton Riyadh, Saudi Arabia

Lean Manufacturing in Saudi Arabia

Jeddah Hilton, Corniche Road, Al Shati'a, Jeddah, Jeddah Governorate, Makkah Al Mukarramah Province, 21362, Saudi Arabia

Corporate Lean Training for TeamsBuild Operational Excellence

Untitled

Tailored to your sector: petrochemicals, automotive, food, metals or pharma
Onsite, live virtual or hybrid delivery to suit your shift patterns
Trainers use your own production data and improvement challenges
Team-wide 5S, kanban, TPM and Kaizen for consistent practice
Supports Vision 2030 localisation and operational excellence goals
Progress tracking and dedicated coordination for group programmes
Scalable across single plants or multiple sites in the Kingdom

What Our Learners Say

Untitled

The Tools Worked on Our Line Straight Away

"The waste walk and value stream mapping exercises changed how I look at our line. Within a week I had cut two clear sources of waiting, and the trainer's examples made every tool easy to apply."

Faisal Al-Harbi

Untitled

0/0

Practical and Easy to Apply

"I finally understand how 5S, standard work and Poka Yoke fit together to protect quality. The day was practical from start to finish, and I now use the OEE method on my own shift."

Nada Al-Qahtani

Untitled

0/0

Hands-On Pull System Design

"Strong session on kanban and Just-in-Time. I came in knowing the theory and left able to size a pull system for our own supermarket. Very hands-on and well paced."

Omar Farouk

Untitled

0/0

One Shared Lean Language for the Plant

"We trained a cross-functional plant team and now everyone speaks the same Lean language. 5S and TPM adoption improved within the first month, and our changeovers are faster."

Khalid Al-Otaibi

Untitled

0/0

Tailored Training That Scaled Across Sites

"Invensis tailored the programme to our petrochemical operations and used our own data in the exercises. The teams left with a shared Kaizen approach that we are now rolling out across sites."

Sara Al-Dossari

Untitled

0/0

4.6

Ratings

100K+

Happy Learners

100+

Locations Worldwide

99%

Training Satisfaction

Enquire with us now

Drop us a query and our learning consultant will reach out to you shortly

Get Course Details & Pricing

Fill out this form and we will respond quickly.

We also deliver Saudi Arabia Certification Trainingacross multiple cities

Invensis Learning delivers industry-leading Lean Manufacturing training solutions tailored for individuals and organizations.

Al Jubail Al Khobar Dammam Riyadh Jeddah

Explore Our Other Course Categories

Agile Certification Training Courses

Project Management Certification Training Courses

IT Service Management Certification Training Courses

Quality Management Certification Courses

DevOps Certification Training Courses

IT Governance Certification Training Courses

Other Related Courses

Foundation

Kaizen

Frequently Asked QuestionsHere's everything you may ask...

Lean Manufacturing Training is a one-day, instructor-led skills course that teaches you to eliminate waste and improve flow in production. It is grounded in the Toyota Production System and the five Lean principles, and covers the eight wastes, Value Stream Mapping, 5S, kanban, TPM, standard work and Kaizen.

General

What is Lean Manufacturing Training?

Who should attend this Lean course in Saudi Arabia?

It suits production and manufacturing managers, manufacturing and industrial engineers, operations supervisors, team leaders, quality engineers, maintenance managers and continuous improvement staff. Anyone responsible for a production operation in the Kingdom will benefit.

Is the training relevant to Vision 2030 goals?

Yes. Vision 2030 and the NIDLP are expanding Saudi Arabia's factory base and pushing localisation and productivity. Lean skills such as waste elimination, 5S and OEE are exactly what manufacturers need to raise output and compete.

Do I need prior Lean experience to attend?

No. The course introduces Lean manufacturing from first principles, so no prior Lean knowledge is required. Some production or operations experience is helpful but not essential, and the hands-on exercises support every level.

Is Lean Manufacturing Training worth it?

Yes. You leave with a practical toolkit you can apply the next day to cut lead time, reduce defects and raise productivity. With Saudi manufacturing growing under Vision 2030, Lean and operational excellence skills are in strong demand across sectors.

Pricing

How much does Lean Manufacturing Training cost in Saudi Arabia?

Fees vary by delivery mode, group size and schedule, so pricing is available on request. Live virtual, classroom and onsite options are quoted separately. Talk to a learning advisor for a quote that fits your needs.

What is included in the course fee?

The fee typically includes instructor-led training across all six Lean modules, hands-on tool exercises, learning materials and a course completion record from Invensis Learning, plus learner support. Contact us for the full inclusions on your chosen format.

Do you offer group or corporate pricing?

Yes. We offer corporate group training with tailored schedules and volume-based pricing for plants, business units and improvement teams. Ask about group pricing for your team.

What payment options are available?

We accept major credit and debit cards and bank transfers, with instalment options on selected plans. Speak with a learning advisor to choose the option that suits you.

Is onsite team training priced differently?

Yes. Onsite and customised team delivery is quoted per engagement based on group size, location and content. Request a group quote and we will build a package for your organisation.

Assessment

How is my learning checked during the course?

Learning is reinforced through hands-on tool exercises, waste identification activities, manufacturing case examples and group discussion. There is no formal test; you apply each Lean tool to realistic scenarios during the day.

What do I receive after completing the training?

You receive a course completion record from Invensis Learning. This is a practical skills course, so the value is the Lean capability you gain rather than a separate credential to maintain.

Is this a formal qualification or a skills course?

It is a practical skills course. There is no formal test and no external credential, and the skills you learn do not expire. You can apply them immediately to production improvement and Lean transformation work.

Do I need to prepare before attending?

No preparation is required. The trainer builds each concept from the ground up, and the exercises give you the practice you need during the session. Come ready to discuss the wastes and challenges on your own lines.

Will the skills need renewal over time?

No. Lean manufacturing knowledge and tools do not expire and require no renewal. Once you learn to run waste walks, VSM, 5S, kanban and Kaizen, you can keep applying and deepening them on the job.

Course Content

What topics does the Lean Manufacturing course cover?

The course covers the Toyota Production System and five Lean principles, the eight wastes (DOWNTIME), Value Stream Mapping, 5S and visual management, pull systems and kanban, JIT, TPM and OEE, standard work, SMED, Heijunka, Poka Yoke and building a Lean culture.

How long is the training?

The programme runs for one day (8 hours) and covers all six Lean modules with concept explanations, real-world case examples and hands-on exercises throughout. A half-day format over two days is also available.

Which Lean tools will I learn to use?

You practise waste walks, current and future-state Value Stream Mapping, 5S audits, kanban sizing, OEE calculation, standard work and SMED. Each tool is applied to realistic production scenarios so you can use it at work.

Are there hands-on exercises?

Yes. Hands-on activities run throughout the day, including waste identification, VSM data collection, a 5S workplace assessment, an OEE calculation and kanban quantity design, so you leave able to apply the tools.

Is the course relevant to non-manufacturing operations?

Yes. While the focus is manufacturing, tools such as 5S, Kaizen, Value Stream Mapping and waste elimination apply to logistics, operations and service delivery too. Teams from many operational environments benefit.

Enrollment

How do I enrol in Lean Manufacturing Training in Saudi Arabia?

You can enrol through the Invensis Learning website. Choose your preferred format, complete your booking, and you will receive access to schedules, joining details and learning resources. See upcoming batches or talk to an advisor.

What delivery formats are available?

The training is available online (live virtual), in the classroom, and as onsite corporate delivery for teams across the Kingdom. Choose the format that fits your schedule and team.

When can I start?

We run regular public batches and can arrange onsite or live virtual sessions to suit your team's availability. Check the upcoming schedules or contact us to confirm the next convenient date.

Can I book training for my whole team?

Yes. Corporate group training is delivered onsite, live virtual or hybrid, tailored to your sector and production challenges. Request a group quote and we will coordinate scheduling for your team.

What is your reschedule or cancellation policy?

Rescheduling and cancellations are handled per our published policy, and selected plans allow you to move to another batch. Reach out to our support team for the details that apply to your booking.

Where Lean Skills Take Your CareerIn-Demand Roles in Saudi Arabia

Who Should TakeLean Manufacturing Training in Saudi Arabia?

Manufacturing Managers and Plant Managers

Production Supervisors and Team Leaders

Quality Engineers and Quality Managers

Industrial Engineers and Process Engineers

Supply Chain and Operations Professionals

Maintenance Engineers and TPM Coordinators

Professionals transitioning into Lean or process improvement roles

Continuous Improvement (CI) and Operational Excellence Specialists

Lean Manufacturing Training in Saudi Arabia

What Is Lean Manufacturing Training and Who Is It For?UntitledYour One-Day Route to Waste-Free Production

What Is Lean Manufacturing Training and Who Is It For?Your One-Day Route to Waste-Free Production

Key Highlightof the Lean Manufacturing Training Course

Lean Manufacturing Training EligibilityWho Can Enroll?

What You Gain from Lean Manufacturing SkillsValue on the Floor and in Your Career

Where Lean Skills Take Your CareerIn-Demand Roles in Saudi Arabia

SECTORS HIRING

GROWTH TRENDS

Market Forces Making Lean Skills Essential in the Kingdom

Vision 2030 Factory Expansion

Automotive and EV Scale-Up

Localisation and In-Kingdom Value

Cost and Energy Efficiency Pressure

Operational Excellence Talent Gap

Food and Pharma Quality Demands

Where You Stand Today,

Your Shift to Lean Capability

Module 1: Foundations of Lean Thinking

Module 2: Identifying and Eliminating Waste (MUDA, MURA, MURI)

Module 3: Value Stream Mapping (VSM)

Module 4: 5S Workplace Organisation

Module 5: Just-in-Time (JIT) Production and Kanban

Module 6: Kaizen and Continuous Improvement Events

Module 7: Error-Proofing with Poka-Yoke and Jidoka

Module 8: Total Productive Maintenance (TPM) and OEE

Module 9: Sustaining Lean and Building a Lean Culture

Course Curriculumof the Lean Manufacturing Training

Module 1: Foundations of Lean Thinking

The Lean Tools You Will Put to WorkA Complete Shop-Floor Toolkit

Eliminate the Eight Wastes (DOWNTIME)

Map Value Streams to Expose Delay

Organise Work with 5S and Visual Management

Design Pull Systems with Kanban and JIT

Raise Reliability with TPM and OEE

Standardise Work and Speed Changeovers

Level Output and Mistake-Proof the Line

Lead Kaizen and Build a Lean Culture

Who Should TakeLean Manufacturing Training in Saudi Arabia?

Lean Manufacturing Training Modesfor Professionals and Teams

Lean Manufacturing Classroom Training

Lean Manufacturing Live Virtual Training

Lean Manufacturing Corporate Group Training

Lean Manufacturing Focused 1-to-1 Training

Lean Manufacturing Classroom Training

Why Choose Invensis Learning in Saudi ArabiaPractical, Instructor-Led, Trusted Worldwide

Lean Manufacturing Training Locations in Saudi ArabiaAll our classroom training is now available online at your convenience

Corporate Lean Training for TeamsBuild Operational Excellence

What Our Learners Say

Enquire with us now

Get Course Details & Pricing

We also deliver Saudi Arabia Certification Trainingacross multiple cities

Explore Our Other Course Categories

Other Related Courses

Poka Yoke

Lean Six Sigma Yellow Belt

Business Process Management

Six Sigma Awareness

7 QC Tools Training

Lean Six Sigma Black Belt

Quality Function Deployment

Lean IT

Lean Six Sigma Green Belt

Minitab Essentials

Design for Six Sigma

Lean Fundamentals

Quality by Design

Root Cause Analysis Training Course