Lean Manufacturing Training in Switzerland

Cut Waste, Improve Flow at Work

Designed for production managers, engineers, supervisors and improvement leads across Switzerland's manufacturing base, this instructor-led course turns Lean theory into shop-floor results. Learn to spot the eight wastes, map value streams and build a Kaizen culture that lifts flow, quality and delivery in high-cost, precision-driven Swiss plants.

Flexible

Duration

Live

Mode

Hours

1K+ already enrolled

4.8 (350+ Reviews)

7 enrolled this week

16 viewing right now

Want to Train Your Team?

Master Lean Manufacturing and Lead Efficiency in Switzerland

Starts from

CHF 430

What Lean Manufacturing Delivers on the Swiss Shop FloorYour Route to Leaner Operations

Lean Manufacturing Training in Switzerland gives production teams a practical route to cutting waste and improving flow across the country's high-value manufacturing base. The Lean Manufacturing Training course is a one-day, non-certification programme rooted in the Toyota Production System (TPS) developed by Taiichi Ohno and Shigeo Shingo. You learn the five Lean principles, the eight wastes (DOWNTIME) and core tools such as value stream mapping, 5S, kanban and Kaizen.

Switzerland runs one of the world's most productive yet highest-cost manufacturing economies, spanning pharmaceuticals, precision engineering, medtech, machinery and food processing. Here, the ability to remove non-value-adding activity is a direct competitive edge. The course suits production managers, engineers, supervisors, quality professionals and improvement leads who want to turn Lean concepts into measurable results.

Delivered in live virtual, classroom and corporate on-site formats, it pairs concept teaching with waste walks, VSM practice and OEE calculation. You leave ready to map a value stream and lead Kaizen from day one, with Invensis Learning.

Key Highlightof the Lean Manufacturing Training Course

End-to-End Skill Development

Structured Lean Manufacturing training in Switzerland designed to help learners understand the core principles, tools, and workflows covered in the program
Course content aligned with current industry expectations, real-world production improvement requirements, and practical learning objectives through a comprehensive Lean Manufacturing training program
Real-world examples and scenario-based learning to help learners connect Lean principles with everyday production, quality, and operations challenges
Guided learning support to help participants strengthen understanding, improve confidence, and apply Lean Manufacturing skills effectively in their roles

Structured Courseware and Learning Resources

Access to organised Lean Manufacturing course materials including Value Stream Mapping templates, 5S audit checklists, and Kaizen event planning guides designed to support step-by-step learning
Topic-wise learning resources, exercises, and knowledge checks to reinforce understanding of waste elimination, flow design, and continuous improvement practices
Practice activities, assignments, and scenario-based exercises to help learners apply Lean tools in realistic production and operations situations using the Online Lean Manufacturing course
Supplementary learning aids such as OEE calculation worksheets, SMED reduction guides, Takt Time reference cards, and Kanban design templates

Instructor-Led, Practical Learning Experience

Live interactive sessions delivered by experienced Lean practitioners with hands-on domain expertise across automotive, electronics, FMCG, and industrial manufacturing sectors
Real-world examples, case discussions, and applied process improvement exercises to deepen practical understanding of Lean tools and techniques
Opportunities to ask questions, clarify doubts, and participate in trainer-led discussions on waste identification, flow analysis, and Kaizen facilitation
Training approach focused on helping learners in Switzerland to use Lean tools confidently at work, not just complete the course content

Flexible Learning Support

Choose from weekend Lean Manufacturing training, live virtual sessions, onsite delivery, or customised group learning based on your schedule and organisational requirements
Options include live virtual classroom training, onsite training, and customised group training depending on availability and organisational requirements
Learning support designed to help participants stay on track before, during, and after the Lean Manufacturing training
Additional revision and post-training support may be available based on the selected course format

Learn the Core Concepts Covered in the Course

Understand the Toyota Production System, Lean philosophy, and the five Lean principles: Value, Value Stream, Flow, Pull, and Perfection
Learn waste identification, Value Stream Mapping, 5S implementation, and Kanban design based on the course curriculum
Explore practical use cases showing how Lean Manufacturing tools are applied in automotive, electronics, healthcare, and service operations environments
Build role-relevant knowledge of OEE improvement, TPM implementation, error-proofing, and continuous improvement that supports better operational decisions

Practice, Assessment, and Completion Support

Practice waste walk exercises, value stream mapping, 5S audits, Kaizen event planning, and OEE calculation through structured activities and simulations
Use assessments to identify knowledge gaps in Lean tools and strengthen understanding of weaker areas
Receive guidance from instructors in Switzerland to improve understanding of Lean principles and stay aligned with course objectives
Earn a course completion certificate after successfully meeting the training requirements

Career and Workplace Application

Build practical Lean Manufacturing skills that can support career growth, role advancement, or improved production and operations performance
Strengthen confidence in applying Value Stream Mapping, 5S, Kaizen, Kanban, and OEE tools to real-world manufacturing and process improvement challenges
Improve professional credibility through structured, skill-focused Lean Manufacturing training recognised across industrial, automotive, FMCG, and service sectors
Strengthen enterprise-wide operational excellence through Lean Manufacturing corporate training for employees across production, quality, engineering, and operations functions

Lean Manufacturing Training EligibilityWho Can Enroll?

No formal prerequisites are required to enroll in the Lean Manufacturing training program in Switzerland
Basic familiarity with production, operations, or quality management concepts is helpful but not mandatory
Professionals with limited prior experience in Lean or continuous improvement tools are welcome to join
Learners from all industries including manufacturing, automotive, FMCG, healthcare, logistics, and service operations can benefit from this training
Individuals and corporate teams in Switzerland seeking to build practical Lean Manufacturing skills are eligible to enroll

Why Lean Manufacturing Skills Pay off in Swiss PlantsReal Gains on the Floor

For Individuals

Lean Manufacturing Training helps production professionals build capability that shows up immediately in flow, quality and cost. You learn to see waste, fix it at source and sustain the improvement, not just complete a course. Whether you work in pharma, precision engineering, medtech or food processing, the tools transfer directly to your line, cell or plant.

If you want to move from firefighting to systematic improvement, this training gives you the Lean toolkit Swiss manufacturers rely on. You gain hands-on practice with the methods that raise output without raising cost.

Spot and remove the eight wastes (DOWNTIME) to cut lead times and free up capacity
Apply 5S and visual management to build a safer, more organised workplace
Map value streams to expose bottlenecks and target the improvements that matter
Design pull and kanban systems that curb overproduction and trim inventory
Calculate OEE and use TPM to lift equipment reliability and output
Lead Kaizen and standard work so gains hold on the shop floor
Gain skills valued across Swiss pharma, medtech, precision and machinery employers
Start applying Lean from day one, with no prior experience needed

For Organizations

Lean Manufacturing group training equips production teams, engineers and supervisors with a shared method for eliminating waste and improving flow. Delivered on-site or live virtual, it can focus on your own processes and priorities. For Swiss manufacturers under margin and cost pressure, a common Lean language across teams turns scattered efforts into a repeatable improvement system.

If your plant needs consistent, measurable operational gains, corporate Lean training builds the internal capability to deliver them. Teams leave able to run waste walks, VSM sessions and Kaizen events on their own lines.

Standardise Lean practice across sites so every team shares one improvement language
Cut waste, lead time and inventory to protect margins in a high-cost economy
Build in-house Kaizen capability that keeps improving after training ends
Improve OEE, quality and on-time delivery across production lines
Upskill whole production teams together for faster, aligned change
Tailor the programme to your plant, products and improvement goals
Strengthen competitiveness against strong-franc and labour-cost pressures

Where Lean Skills Take You in SwitzerlandIn-Demand Swiss Roles

Lean skills are consistently sought across Switzerland's manufacturing economy, from Basel's pharma cluster to precision engineering, medtech and machinery. As a strong franc and high labour costs push employers to do more with less, professionals who can eliminate waste and improve flow stand out. Demand spans production and manufacturing engineers, operations supervisors, continuous improvement leads and plant managers, and here is what the market shows right now.

CHF 130,000

Continuous Improvement Manager, Switzerland

average per year, ERI SalaryExpert 2026

CHF 137,640

Manufacturing Manager pay, Switzerland

average per year, ERI 2026

97+

Lean Six Sigma roles advertised, Switzerland

Glassdoor, June 2026

CHF 152bn

Swiss chemical and pharma exports

over 52% of exports, S-GE 2026

SECTORS HIRING

—Pharmaceuticals and Life Sciences (Basel region)
—Precision Engineering and Watchmaking
—Medical Technology (Medtech)
—Machinery, Electrical and Metals (MEM)
—Food and Beverage Processing
—Chemicals and Advanced Materials

GROWTH TRENDS

—Strong franc and high costs pushing efficiency and waste reduction
—Chronic skills shortages raising demand for improvement talent
—Industry 4.0 and AI pairing with Lean for smarter production
—Reshoring of high-value manufacturing to Swiss sites
—Sustainability rules rewarding leaner, lower-waste operations
—Pharma and medtech capacity expansion in the Basel cluster

Sources: ERI SalaryExpert, Glassdoor, PayScale (Switzerland) 2026; S-GE, Swisspreneur, Deloitte (Swiss manufacturing) 2026.

Designation

Lean Manufacturing Professionals in Switzerland: Salary Insights and Trends

Companies Hiring in Switzerland

CHF 75K

Min

CHF 90K

Average

CHF 110K

Max

ERI SalaryExpert · PayScale (Switzerland) 2026

NestleLonzaJohnson & JohnsonBuhler

Source: Nestle · Lonza · Johnson & Johnson · Buhler

What Is Driving Lean Demand in Swiss Manufacturing

High-Cost Production Pressure

Switzerland is one of the world's most expensive places to manufacture. A strong franc and steep labour costs force plants to strip out waste and lift productivity to stay competitive on exports.

Lean training builds waste-elimination skills

Chronic Skills Shortage

Manufacturers face persistent talent shortages expected to run into 2030. Teams that can improve flow and coach Kaizen help plants do more with the people they already have.

Lean training builds improvement-leader skills

Pharma and Medtech Complexity

Basel's dense pharma and medtech cluster runs high-precision, regulated production. Tools such as 5S, standard work and OEE raise efficiency while protecting GMP compliance.

Lean training builds efficiency and compliance skills

Industry 4.0 Meets Lean

AI, automation and digital tools are reshaping Swiss factories. They deliver most when built on a Lean base of stable, waste-free processes rather than bolted onto messy ones.

Lean training builds process-stability skills

Margin and Value-Leakage Pressure

Global competition squeezes margins in machinery, electronics and food. Value stream mapping exposes where cost and time leak so leaders can rebalance to what customers pay for.

Lean training builds value stream mapping skills

Sustainability and Waste Rules

New Swiss sustainability and due-diligence expectations reward leaner operations. Cutting overproduction, motion and defects supports both cost and environmental goals.

Lean training builds waste-reduction skills

Sources: Deloitte, PwC, OECD, S-GE, Gi Group (Swiss manufacturing) 2026.

Lean is more than a set of tools. It is how Swiss plants stay competitive on quality and cost. Join professionals who cut waste, improve flow and lead change on the shop floor. Start your Lean journey today.

Your Swiss Lean Transformation

Your Shop Floor Before and After Lean

See the Shift Lean Delivers

Swiss manufacturers compete on quality and productivity, not low cost, so the ability to run Lean is what separates strong plants from the rest. Here is how building these skills changes your day-to-day on the line.

Today

Limited visibility of where cost and time leak in your process

After Lean

You map the value stream and target the waste that matters most

Today

Limited visibility of where cost and time leak in your process

Today

Seen as a capable operator rather than an improvement leader

After Lean

Positioned for continuous improvement and operations roles Swiss employers seek

Today

Seen as a capable operator rather than an improvement leader

Today

Your plant struggles to offset strong-franc and cost pressure

After Lean

You help lift productivity and protect margins with leaner operations

Today

Your plant struggles to offset strong-franc and cost pressure

You build Lean capability

Before

You spot problems late, once defects or delays have already hit output

Now you have

You see the eight wastes early and remove them at source

Before

You spot problems late, once defects or delays have already hit output

Before

Improvement is ad hoc and rarely sticks after the initial push

Now you have

A structured Kaizen and standard-work habit that keeps gains in place

Before

Improvement is ad hoc and rarely sticks after the initial push

Before

Your value comes from firefighting daily production issues

Now you have

Recognition as someone who prevents problems and improves flow

Before

Your value comes from firefighting daily production issues

Before

Lean is a set of terms you have heard but not applied

Now you have

A working toolkit of VSM, 5S, kanban, OEE and TPM you can use

Before

Lean is a set of terms you have heard but not applied

"In a high-cost economy, the plants that thrive are the ones that waste the least, and that starts with people who know how to see it."

Join 50,000+ professionals who trained with Invensis Learning and put Lean to work.

Sources: ERI SalaryExpert, Glassdoor (Switzerland) 2026; Deloitte, S-GE (Swiss manufacturing) 2026.

Module 1: Foundations of Lean Thinking

Overview of the Toyota Production System (TPS), the history of Lean, and how Lean thinking differs from traditional mass production approaches
Understanding the five Lean principles: Value, Value Stream, Flow, Pull, and Perfection, and how they apply to manufacturing and service environments
Introduction to Lean culture, the leadership role in Lean transformation, and the importance of employee engagement in sustaining continuous improvement

Module 2: Identifying and Eliminating Waste (MUDA, MURA, MURI)

Identifying the eight types of waste: Defects, Overproduction, Waiting, Non-Utilised Talent, Transportation, Inventory, Motion, and Extra Processing
Conducting waste walk exercises to assess current-state operations and prioritise improvement opportunities across production processes
Understanding the difference between MUDA (waste), MURA (unevenness), and MURI (overburden), and applying structured elimination strategies for each

Module 3: Value Stream Mapping (VSM)

Creating current-state value stream maps to visualise the flow of materials and information across the production process
Analysing current-state maps to identify bottlenecks, excess inventory, non-value-added steps, and process cycle efficiency metrics
Designing future-state value stream maps and building improvement roadmaps to close the gap between current and desired production performance

Module 4: 5S Workplace Organisation

Implementing the five steps of 5S: Sort (Seiri), Set in Order (Seiton), Shine (Seiso), Standardise (Seiketsu), and Sustain (Shitsuke)
Conducting 5S workplace assessments, scoring production areas, and identifying corrective actions to improve organisation and visual management
Building 5S sustaining mechanisms including audit schedules, visual controls, and standard work documentation to maintain workplace improvements

Module 5: Just-in-Time (JIT) Production and Kanban

Understanding Just-in-Time production principles including Takt Time analysis, one-piece flow, and pull-based scheduling to reduce inventory and lead times
Designing and implementing Kanban pull systems to manage material flow, signal replenishment, and eliminate overproduction between production stages
Calculating Takt Time, cycle time, and process lead time to balance workload and design efficient production flows aligned with customer demand

Module 6: Kaizen and Continuous Improvement Events

Understanding Kaizen philosophy, the PDCA (Plan-Do-Check-Act) improvement cycle, and the principles of rapid improvement event facilitation
Planning, facilitating, and following up on structured Kaizen events including team selection, problem scoping, root cause analysis, and countermeasure implementation
Building a Kaizen culture through daily improvement habits, idea management systems, and leadership behaviours that sustain continuous improvement momentum

Module 7: Error-Proofing with Poka-Yoke and Jidoka

Understanding error-proofing principles and the difference between detection and prevention approaches to quality control in manufacturing processes
Designing and implementing Poka-Yoke (mistake-proofing) devices and mechanisms to eliminate defects at the source before they reach the next production stage
Applying Jidoka (autonomation) principles to enable machines and operators to detect abnormalities, stop production, and signal for corrective action automatically

Module 8: Total Productive Maintenance (TPM) and OEE

Understanding Total Productive Maintenance principles including the eight pillars of TPM and how TPM supports Lean production by eliminating equipment-related waste
Calculating Overall Equipment Effectiveness (OEE) using Availability, Performance, and Quality components to measure and improve production asset performance
Implementing Autonomous Maintenance practices to involve operators in basic equipment care, inspection, and early defect detection to reduce unplanned downtime

Module 9: Sustaining Lean and Building a Lean Culture

Developing Lean management systems including visual management, daily team meetings, tiered accountability processes, and leader standard work to sustain improvements
Measuring and tracking Lean progress using key performance indicators including lead time, first-pass yield, OEE, inventory turns, and on-time delivery
Building a long-term Lean transformation roadmap, engaging cross-functional teams, and developing internal Lean practitioner capability to drive ongoing operational excellence

Course Curriculumof the Lean Manufacturing Training

The Lean Manufacturing training curriculum in Switzerland is structured across nine modules, taking learners from foundational Lean thinking and waste identification through to advanced production system design, error-proofing, and sustaining continuous improvement culture.

100% Secure and Safe download

Overview of the Toyota Production System (TPS), the history of Lean, and how Lean thinking differs from traditional mass production approaches
Understanding the five Lean principles: Value, Value Stream, Flow, Pull, and Perfection, and how they apply to manufacturing and service environments
Introduction to Lean culture, the leadership role in Lean transformation, and the importance of employee engagement in sustaining continuous improvement

Reframes efficiency as a mindset built into every decision, not a one-time cost-cutting exercise.

Module 1: Foundations of Lean Thinking

Overview of the Toyota Production System (TPS), the history of Lean, and how Lean thinking differs from traditional mass production approaches
Understanding the five Lean principles: Value, Value Stream, Flow, Pull, and Perfection, and how they apply to manufacturing and service environments
Introduction to Lean culture, the leadership role in Lean transformation, and the importance of employee engagement in sustaining continuous improvement

Reframes efficiency as a mindset built into every decision, not a one-time cost-cutting exercise.

100% Secure and Safe download

The Lean Tools You Will MasterSkills You Can Apply at Work

In Lean Manufacturing Training you learn to apply the full Toyota Production System toolkit, from seeing waste to sustaining improvement. Each skill maps to a real production tool you can use on your own line or cell.

See and Eliminate the Eight Wastes

Identify defects, overproduction, waiting, non-utilised talent, transport, inventory, motion and extra processing using the DOWNTIME model, then run a Gemba waste walk to target them.

Map Value Streams

Draw current and future-state value stream maps, calculate takt time, find the bottleneck and separate value-adding steps from waste to plan your improvements.

Apply 5S and Visual Management

Sort, set in order, shine, standardise and sustain the workplace, and use Andon, boards and floor markings so problems are visible at a glance.

Design Pull and Kanban Systems

Move from push to pull production, size kanban loops and supermarkets, and apply Just-in-Time to cut overproduction and inventory across the line.

Improve Equipment with TPM and OEE

Calculate Overall Equipment Effectiveness from availability, performance and quality, tackle the six big losses and apply Total Productive Maintenance to lift reliability.

Build Standard Work

Document the safest, most efficient work sequence using takt time, work sequence and standard WIP so results are consistent and improvement has a clear baseline.

Cut Changeover with SMED

Separate internal and external setup, convert and streamline it, and apply Single-Minute Exchange of Die to enable smaller batches and greater flexibility.

Lead Kaizen and a Lean Culture

Run daily Kaizen and focused events, use A3 problem solving and Heijunka levelling, and apply Lean leadership habits that make improvement stick.

Who Should TakeLean Manufacturing Training in Switzerland?

Manufacturing Managers and Plant Managers

Production Supervisors and Team Leaders

Quality Engineers and Quality Managers

Industrial Engineers and Process Engineers

Supply Chain and Operations Professionals

Maintenance Engineers and TPM Coordinators

Professionals transitioning into Lean or process improvement roles

Continuous Improvement (CI) and Operational Excellence Specialists

Who Can Take This Certification Training

Lean Manufacturing Training Modesfor Professionals and Teams

We offer flexible training formats designed to suit different learning preferences, schedules, and professional goals. Whether you prefer self-paced learning or a structured, corporate, instructor-led experience, choose the option that best supports your skill development journey with the best Lean Manufacturing online training options.

Lean Manufacturing Classroom Training

Instructor-led classroom sessions
Interactive discussions and group activities
Real-world examples and practical exercises
Structured learning with fixed schedules
Opportunities for peer networking and collaboration
Practice assessments and knowledge checks
Dedicated Q&A and concept clarification
Immediate trainer feedback and support

Untitled

Learn through face-to-face sessions led by experienced instructors in a collaborative classroom environment. This classroom Lean Manufacturing training in Switzerland combines expert guidance, peer interaction, and hands-on activities to create an engaging learning experience.

Untitled

Best For: Learners who prefer in-person interaction, structured schedules, and collaborative learning experiences.

Untitled

Lean Manufacturing Live Virtual Training

Live online instructor-led sessions
Interactive discussions and virtual activities
Expert guidance from experienced trainers
Practice assessments and revision support
Dedicated Q&A sessions for concept clarification
Fixed schedules for accountability and momentum
Small batch sizes for personalized attention
Access from any location with internet connectivity

CHF 430

Attend fully interactive online sessions from anywhere while benefiting from real-time instructor guidance and collaborative learning experiences through virtual Lean Manufacturing training.

Untitled

Best For: Professionals seeking the flexibility of online learning without compromising on live instructor interaction.

Untitled

Lean Manufacturing Corporate Group Training

Customized training aligned to organizational goals
Flexible delivery: onsite, virtual, hybrid, or blended
Scheduling tailored to business availability
Role-based examples and industry-relevant discussions
Progress tracking and learner assessments where applicable
Dedicated coordination and administrative support
Consistent learning experiences across teams
Scalable delivery for local, regional, or global workforces

Untitled

Designed for organizations in Switzerland that want to build capabilities at scale, standardize Lean practices, and support workforce development through customized Lean Manufacturing training for companies.

Untitled

Best For: Organizations looking to upskill employees, address capability gaps, and deliver consistent training across teams.

Untitled

Lean Manufacturing Focused 1-to-1 Training

One-to-one instructor attention
Customized learning plans and objectives
Flexible scheduling based on availability
Personalized feedback and coaching
Additional focus on challenging topics
Targeted practice and revision support
Faster clarification of questions and concepts
Learning pace is adapted to individual needs

Untitled

Receive personalized instruction tailored to your goals, pace, and learning requirements through dedicated sessions from trusted Lean Manufacturing training company.

Untitled

Best For: Professionals seeking personalized guidance, accelerated learning, or focused support to achieve specific outcomes.

Untitled

Lean Manufacturing Classroom Training

Instructor-led classroom sessions

Interactive discussions and group activities

Real-world examples and practical exercises

Structured learning with fixed schedules

Opportunities for peer networking and collaboration

Practice assessments and knowledge checks

Dedicated Q&A and concept clarification

Immediate trainer feedback and support

Untitled

Please Note:Learn through face-to-face sessions led by experienced instructors in a collaborative classroom environment. This classroom Lean Manufacturing training in Switzerland combines expert guidance, peer interaction, and hands-on activities to create an engaging learning experience.

Best For: Learners who prefer in-person interaction, structured schedules, and collaborative learning experiences.

Loading schedules…

Why Choose Invensis Learning in SwitzerlandPractical Lean Training

Invensis Learning delivers practical, instructor-led Lean Manufacturing Training for individual professionals and production teams across Switzerland. Our trainers are experienced quality and operational-excellence practitioners who bring real shop-floor examples, hands-on exercises and workplace-ready methods to every session. Whether you enrol as an individual or arrange corporate training for your plant, you get flexible delivery, structured courseware and dedicated learner support built around applying Lean where it counts, on your own production line.

Experienced quality and operational-excellence trainers with real manufacturing exposure
Flexible formats: online (live virtual), classroom and on-site corporate training
Hands-on exercises including waste walks, VSM, 5S and OEE practice
Structured courseware covering the full Lean and TPS toolkit
Customised group training aligned to your plant and processes
Dedicated learner support before, during and after training
Globally trusted provider with ISO-certified quality and security
Scalable delivery for teams across Swiss and international sites

200K+

Professionals Trained

12M+

Hours of Training Delivered

Flexible Learning Modes

98%

First-Attempt Pass Rate

ISO 9001:2015 Certified

ISO 27001:2022 Certified

Secure SSL Encryption

Leaders in Training industry for 12+ years

Over 5000 five star reviews

Level AA conformance, W3C WCAG 2.2

Lean Manufacturing Training Locations in SwitzerlandAll our classroom training is now available online at your convenience

Lean Manufacturing in Switzerland

Tschuggen Grand Hotel, Tschuggen Torweg 1, 7050 Arosa

Lean Manufacturing in Switzerland

Hotel Les Trois, Rois Blumenrain 8, 4001 Basel

Lean Manufacturing in Switzerland

Tschuggen Grand Hotel, Tschuggen Torweg 1, 7050 Arosa

Lean Manufacturing in Switzerland

Hotel Les Trois, Rois Blumenrain 8, 4001 Basel

Corporate Lean Training for Swiss TeamsBuilt for Your Plant

Untitled

Tailored to your products, processes and improvement priorities
Delivered on-site, live virtual or hybrid to fit shift patterns
Suitable for small teams through to whole production sites
Real waste-walk, VSM and Kaizen practice on your own lines
Experienced trainers with manufacturing and quality expertise
Progress tracking and dedicated coordination for group training
Builds lasting in-house continuous improvement capability

What Our Learners Say

Untitled

Lean That Works on the Floor

"The waste walk and VSM exercises finally made Lean click for me. Within weeks I cut changeover time on my line and freed up real capacity."

Lukas Meier

Untitled

0/0

Confident Running Kaizen

"The OEE and TPM sessions were exactly what our maintenance team needed. I now run Kaizen events with confidence and the improvements are sticking."

Sophie Bianchi

Untitled

0/0

Practical and Hands-On

"A practical, well-paced course. The 5S and standard-work tools transferred straight to our assembly cell with no fluff."

Andreas Keller

Untitled

0/0

One Language Across Shifts

"We trained two production teams on-site. Having one shared Lean language across shifts has noticeably improved flow and on-time delivery."

Claudia Frei

Untitled

0/0

Tailored to Our Plant

"The trainer tailored every exercise to our plant. Our supervisors left able to map value streams and lead improvement without outside help."

Martin Huber

Untitled

0/0

4.6

Ratings

100K+

Happy Learners

100+

Locations Worldwide

99%

Training Satisfaction

Enquire with us now

Drop us a query and our learning consultant will reach out to you shortly

Get Course Details & Pricing

Fill out this form and we will respond quickly.

We also deliver Switzerland Certification Trainingacross multiple cities

Invensis Learning delivers industry-leading Lean Manufacturing training solutions tailored for individuals and organizations.

Bern Basel Geneva Lausanne Zurich

Explore Our Other Course Categories

Agile Certification Training Courses

Project Management Certification Training Courses

IT Service Management Certification Training Courses

Quality Management Certification Courses

DevOps Certification Training Courses

IT Governance Certification Training Courses

Other Related Courses

Foundation

Kaizen

Frequently Asked QuestionsHere's everything you may ask...

Lean Manufacturing Training is a one-day, non-certification course that teaches you to eliminate waste and improve flow using the Toyota Production System. You learn the five Lean principles, the eight wastes, value stream mapping, 5S, kanban, JIT, TPM and Kaizen, with hands-on exercises throughout.

General

What is Lean Manufacturing Training?

Is Lean Manufacturing Training worth it in Switzerland?

Yes. In a high-cost, export-driven economy, employers across pharma, medtech, precision engineering and machinery value people who can cut waste and lift productivity. The skills apply immediately on the shop floor and transfer across sectors and sites.

Who should attend this course?

The training suits production and manufacturing managers, manufacturing and industrial engineers, operations supervisors, team leaders, quality engineers, maintenance managers and continuous improvement leads. Anyone working in or responsible for a production operation will benefit.

Do I need prior Lean experience to join?

No. There are no prerequisites. The course introduces Lean manufacturing from first principles, so beginners and experienced professionals both gain practical, ready-to-use tools. Prior manufacturing experience is helpful but not required.

What standard is the course based on?

The training is grounded in the Toyota Production System (TPS) developed by Taiichi Ohno and Shigeo Shingo, and the five Lean principles popularised by Womack and Jones. It covers the established Lean toolkit used in manufacturing worldwide.

Pricing

How much does Lean Manufacturing Training cost in Switzerland?

Course fees vary by delivery mode, group size and schedule, so pricing is available on request. Contact a learning advisor for current individual and corporate rates and to find the option that fits your budget. Request a quote to get started.

What is included in the course fee?

The fee typically covers instructor-led training across all six Lean modules, hands-on exercises, courseware and learning resources, and a course completion certificate from Invensis Learning. Confirm the exact inclusions for your chosen format when you enquire.

Do you offer corporate or group pricing?

Yes. We offer tailored group and corporate rates for teams, business units and whole sites, with volume-based pricing. On-site and live virtual delivery are available. Ask about corporate pricing for a quote built around your plant.

Is there a certification or exam fee?

No. This is a non-certification course, so there is no exam or separate certification fee. You receive a course completion certificate from Invensis Learning, and the fee covers the training itself.

What payment options are available?

We accept major cards and bank transfers, and can discuss instalment options on selected plans. Speak with a learning advisor to choose the payment method that works best for you.

Assessment

Is there an exam for this course?

No. Lean Manufacturing Training is a non-certification course with no examination. Learning is reinforced through hands-on tool exercises, waste-identification activities and case discussion during the programme.

What will I receive on completion?

You receive a course completion certificate from Invensis Learning. No external credential is awarded, as this is a practical skills course rather than a certification programme.

How is learning assessed during the training?

There is no formal assessment. Instead, you apply Lean tools through practical exercises such as waste walks, value stream mapping, 5S assessment and OEE calculation, so you leave able to use the methods at work.

Will I be able to apply Lean straight away?

Yes. By the end you can run a waste walk, map a value stream, plan a 5S rollout, design a kanban pull system, calculate OEE and lead Kaizen improvements on your own production line.

Does the completion certificate expire?

No. The skills you learn do not expire and there is no renewal requirement. Lean tools remain immediately applicable to production improvement throughout your career.

Course Content

What topics does the course cover?

The programme covers Lean foundations and the Toyota Production System, the eight wastes (DOWNTIME), value stream mapping, 5S and visual management, pull systems and kanban, JIT, TPM and OEE, standard work, SMED, Heijunka, Poka Yoke and building a Lean culture.

What practical exercises are included?

You take part in a Gemba-based waste walk, value stream mapping practice, a 5S workplace assessment, OEE calculation, kanban quantity sizing and standard-work observation, so every tool is applied to realistic production scenarios.

How long is the training?

The course runs for one day (eight hours), or can be split into two half-days. It covers all six Lean modules with concept teaching, real manufacturing examples and hands-on exercises throughout.

Can beginners follow the content?

Yes. The course builds from first principles, so no prior Lean knowledge is needed. Content is paced for mixed groups, with practical exercises that help every participant apply the tools confidently.

Is the course relevant to my industry?

Yes. While rooted in manufacturing, the tools apply across pharma, medtech, precision engineering, machinery, food processing and operations generally. Corporate sessions can be tailored to your sector and processes.

Enrollment

How do I enrol in Lean Manufacturing Training?

You can enrol through the Invensis Learning website. Choose your preferred format, complete the booking, and you will receive joining details, schedules and learning resources. Talk to a learning advisor if you need help choosing.

What delivery formats are available?

The course is available as online (live virtual) instructor-led training, classroom training and corporate on-site sessions, so you can pick the format that suits your schedule and team.

When can I start?

Public sessions run on a regular schedule, and corporate sessions are arranged around your team's availability. Contact us to see upcoming dates and reserve your place.

Can you train my whole team on-site?

Yes. We deliver on-site and live virtual corporate training for production teams across Switzerland, tailored to your plant and improvement goals. Ask about a group booking for your site.

What is the cancellation or reschedule policy?

Rescheduling and cancellation are handled per our published policy, and flexible options are available on selected plans. Reach out to our team for the details that apply to your booking.

Where Lean Skills Take You in SwitzerlandIn-Demand Swiss Roles

Who Should TakeLean Manufacturing Training in Switzerland?

Manufacturing Managers and Plant Managers

Production Supervisors and Team Leaders

Quality Engineers and Quality Managers

Industrial Engineers and Process Engineers

Supply Chain and Operations Professionals

Maintenance Engineers and TPM Coordinators

Professionals transitioning into Lean or process improvement roles

Continuous Improvement (CI) and Operational Excellence Specialists

Lean Manufacturing Training in Switzerland

What Lean Manufacturing Delivers on the Swiss Shop FloorUntitledYour Route to Leaner Operations

What Lean Manufacturing Delivers on the Swiss Shop FloorYour Route to Leaner Operations

Key Highlightof the Lean Manufacturing Training Course

Lean Manufacturing Training EligibilityWho Can Enroll?

Why Lean Manufacturing Skills Pay off in Swiss PlantsReal Gains on the Floor

Where Lean Skills Take You in SwitzerlandIn-Demand Swiss Roles

SECTORS HIRING

GROWTH TRENDS

What Is Driving Lean Demand in Swiss Manufacturing

High-Cost Production Pressure

Chronic Skills Shortage

Pharma and Medtech Complexity

Industry 4.0 Meets Lean

Margin and Value-Leakage Pressure

Sustainability and Waste Rules

Your Shop Floor Before and After Lean

See the Shift Lean Delivers

Module 1: Foundations of Lean Thinking

Module 2: Identifying and Eliminating Waste (MUDA, MURA, MURI)

Module 3: Value Stream Mapping (VSM)

Module 4: 5S Workplace Organisation

Module 5: Just-in-Time (JIT) Production and Kanban

Module 6: Kaizen and Continuous Improvement Events

Module 7: Error-Proofing with Poka-Yoke and Jidoka

Module 8: Total Productive Maintenance (TPM) and OEE

Module 9: Sustaining Lean and Building a Lean Culture

Course Curriculumof the Lean Manufacturing Training

Module 1: Foundations of Lean Thinking

The Lean Tools You Will MasterSkills You Can Apply at Work

See and Eliminate the Eight Wastes

Map Value Streams

Apply 5S and Visual Management

Design Pull and Kanban Systems

Improve Equipment with TPM and OEE

Build Standard Work

Cut Changeover with SMED

Lead Kaizen and a Lean Culture

Who Should TakeLean Manufacturing Training in Switzerland?

Lean Manufacturing Training Modesfor Professionals and Teams

Lean Manufacturing Classroom Training

Lean Manufacturing Live Virtual Training

Lean Manufacturing Corporate Group Training

Lean Manufacturing Focused 1-to-1 Training

Lean Manufacturing Classroom Training

Why Choose Invensis Learning in SwitzerlandPractical Lean Training

Lean Manufacturing Training Locations in SwitzerlandAll our classroom training is now available online at your convenience

Corporate Lean Training for Swiss TeamsBuilt for Your Plant

What Our Learners Say

Enquire with us now

Get Course Details & Pricing

We also deliver Switzerland Certification Trainingacross multiple cities

Explore Our Other Course Categories

Other Related Courses

Poka Yoke

Lean Six Sigma Yellow Belt

Business Process Management

Six Sigma Awareness

7 QC Tools Training

Lean Six Sigma Black Belt

Quality Function Deployment

Lean IT

Lean Six Sigma Green Belt

Minitab Essentials

Design for Six Sigma

Lean Fundamentals

Quality by Design

Root Cause Analysis Training Course